Repara tus cosas Comunidad Tienda

Azpen A701 Speaker Replacement

Introducción

Replacing the speaker requires the use of a soldering kit. A guide to soldering is available on iFixit's website here.

Qué necesitas

  1. Azpen A701 Speaker Replacement, Speaker: paso 1, imagen 1 de 1

    • Wedge plastic spudger in between the back panel and the speaker of the device.

    Editar

  2. Azpen A701 Speaker Replacement: paso 2, imagen 1 de 2 Azpen A701 Speaker Replacement: paso 2, imagen 2 de 2

    • Gently pry out the speaker from the back panel using the plastic spudger.

    Editar

  4. Azpen A701 Speaker Replacement: paso 3, imagen 1 de 1

    • Heat solder and apply to the wires where they attach to the motherboard. This will disconnect the wires from the motherboard.

    • The wires should still be attached to the speaker.

    Editar

  5. Azpen A701 Speaker Replacement: paso 4, imagen 1 de 1

    • Take the speaker and wires that are attached out of the device and insert a new speaker by soldering the wires to the motherboard.

    Editar
Conclusión

To reassemble your device, snap back piece back on to device and secure both 2cm screws at the bottom.

Autor

con 2 otros colaboradores

Grant Harding

Miembro Desde 03/11/15

249 Reputación

2 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

Colorado Springs, Team 2-1, Panko Spring 2015 Miembro de Colorado Springs, Team 2-1, Panko Spring 2015

UCCS-PANKO-S15S2G1

3 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 6

Todo El Tiempo: 128