Repara tus cosas Comunidad Tienda

Axess TA2513-10WT Battery Replacement

Qué necesitas

  1. Axess TA2513-10WT Battery Replacement, Back Cover: paso 1, imagen 1 de 1

    • Lay the tablet down on a flat surface with the screen facing up, and the external camera facing upwards and closest to you.

    Editar

  2. Axess TA2513-10WT Battery Replacement: paso 2, imagen 1 de 3 Axess TA2513-10WT Battery Replacement: paso 2, imagen 2 de 3 Axess TA2513-10WT Battery Replacement: paso 2, imagen 3 de 3

    • Insert the plastic opening tool in the space between the screen and the back cover above the volume buttons.

    • Slide the plastic opening tool gently along the sides.

    • If a small gap is not created between the screen and the back cover, pry gently upward at each of these latching points.

    Editar

  3. Axess TA2513-10WT Battery Replacement: paso 3, imagen 1 de 1

    • Place the spudger in an open space to keep the back case from shutting while you continue to slide the opening tool.

    Editar

  4. Axess TA2513-10WT Battery Replacement: paso 4, imagen 1 de 1

    • Remove the back cover with your hands once all points have been unlatched. It should separate completely from the screen that contains the battery and chip components.

    Editar

  6. Axess TA2513-10WT Battery Replacement, Battery: paso 5, imagen 1 de 1

    • Shove the Spudger below the battery pack to remove any tape or adhesive residue.

    Editar

  7. Axess TA2513-10WT Battery Replacement: paso 6, imagen 1 de 1

    • Lift the battery up with your hands to ensure complete detachment from the screen.

    Editar

  8. Axess TA2513-10WT Battery Replacement: paso 7, imagen 1 de 1

    • Identify the red wire attached to the node labeled "B+" and the black wire attached to the node labeled "B-"

    Editar

  9. Axess TA2513-10WT Battery Replacement: paso 8, imagen 1 de 1

    • Press the heated soldering iron down on the "B+" node while simultaneously tugging on the red wire.

    Editar

  10. Axess TA2513-10WT Battery Replacement: paso 9, imagen 1 de 1

    • Remove the red wire from the node labeled "B+"

    Editar

  11. Axess TA2513-10WT Battery Replacement: paso 10, imagen 1 de 1

    • Using the same process as the red wire, detach the black wire from the node labeled "B-".

    Editar

  12. Axess TA2513-10WT Battery Replacement: paso 11, imagen 1 de 1

    • The battery should now be separated from both the screen and circuit board

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Steven Kavanagh

Miembro Desde 03/24/15

301 Reputación

3 Guías creadas

Insignias: 3

Equipo

Baylor, Team 6-3, Shaver Spring 2015 Miembro de Baylor, Team 6-3, Shaver Spring 2015

BU-SHAVER-S15S6G3

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 7

Todo El Tiempo: 296