Saltar al contenido principal

Autosampler Reset for Node Triggered Sampling (For Old & New Versions)

Qué necesitas

  1. Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Switch to manual mode: paso 1, imagen 1 de 2 Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Switch to manual mode: paso 1, imagen 2 de 2
    • To enable manual mode, flip the switch to "Manual Mode"

    • LCD screen will turn on

  2. Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Restart the sampling program: paso 2, imagen 1 de 2 Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Restart the sampling program: paso 2, imagen 2 de 2
    • Press On then press Start Sampling

    • Press Enter

  3. Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Select bottle: paso 3, imagen 1 de 3 Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Select bottle: paso 3, imagen 2 de 3 Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Select bottle: paso 3, imagen 3 de 3
    • Press the number of the bottle you want to sample on

    • Press Enter

    • LCD should now show which bottle it will take a sample in

  4. Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Switch to autonomous mode: paso 4, imagen 1 de 2 Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Switch to autonomous mode: paso 4, imagen 2 de 2
    • To enable autonomous mode, flip switch to "Node Trigger Mode"

    • LCD should turn off

    • If the autosampler is to be remotely triggered, avoid using the ON/OFF button to power off the sampler.

Conclusión

Now the sampler is ready to be triggered remotely by an open-storm sensor node.

Una persona más ha completado esta guía.

Brandon Wong

Miembro Desde 01/16/18

502 Reputación

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 396