Saltar al contenido principal

Introducción

Replacing the battery in the Tommy 20 is a relatively simple replacement, just make sure you have 3 replacement AA batteries ready to go beforehand along with a Phillips #1 Screwdriver! A good first step in any repair goal concerning the Tommy 20!

Partes

  1. Automatic Tommy 20 Battery Replacement, Removing the Battery Cover: paso 1, imagen 1 de 2 Automatic Tommy 20 Battery Replacement, Removing the Battery Cover: paso 1, imagen 2 de 2
    • Remove the single 1mm screw connecting the battery cover to the gun using a Phillips #1 screwdriver.

    • Lift the cover away from the gun and remove.

  2. Automatic Tommy 20 Battery Replacement, Remove the Batteries: paso 2, imagen 1 de 2 Automatic Tommy 20 Battery Replacement, Remove the Batteries: paso 2, imagen 2 de 2
    • Remove all three batteries from compartment by pulling up on the positive end of each battery.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Reed Garmsen

Miembro Desde 07/10/14

468 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 6-22, Maness Fall 2014 Miembro de Cal Poly, Team 6-22, Maness Fall 2014

CPSU-MANESS-F14S6G22

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 474