Audiovox CR8030iE5 Top-Casing Replacement

Introducción

The purpose of this guide is to show you how to open up your Audiovox. Once inside, you will be able to check out all of the different internal components, and begin repair if necessary!

Qué necesitas

Paso 1 Top-Casing

Audiovox CR8030iE5 Top-Casing Replacement, Top-Casing: paso 1, imagen 1 de 1

Turn the device upside down.
Apply constant pressure to the base of your Audiovox, while holding the plastic casing until the casing is completely removed.

Editar

Paso 2

Remove the four screws from the base using a Phillips #1 screwdriver.

Editar

Paso 3

Turn the device right-side up.
Gently pull the top panel off of the device.

Editar

Paso 4

Using a Phillips #1 screwdriver, remove the screw found in the middle of the board.

Editar

Paso 5

Pull back the board gently to avoid disconnecting the attached wires.
This allows you to view the soldered connections on the other side, and the internal components.

Editar