Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Audiovox CDM-8900 Main LCD Screen Replacement

Qué necesitas

  1. Audiovox CDM-8900 Main LCD Screen Replacement, Main LCD Screen: paso 1, imagen 1 de 3 Audiovox CDM-8900 Main LCD Screen Replacement, Main LCD Screen: paso 1, imagen 2 de 3 Audiovox CDM-8900 Main LCD Screen Replacement, Main LCD Screen: paso 1, imagen 3 de 3
    • Remove screw covers (4 in total) using the spudger.

    • Note: Because the bottom two screw covers are attached with an adhesive, you will not be able to replace them when you reassemble the phone.

  2. Audiovox CDM-8900 Main LCD Screen Replacement: paso 2, imagen 1 de 3 Audiovox CDM-8900 Main LCD Screen Replacement: paso 2, imagen 2 de 3 Audiovox CDM-8900 Main LCD Screen Replacement: paso 2, imagen 3 de 3
    • Unscrew screws (4 in total) using the Phillips #00 screwdriver

    • Set screws aside carefully as they are small and easy to lose.

    • Tweezers may be useful for removing loosened screws.

  3. Audiovox CDM-8900 Main LCD Screen Replacement: paso 3, imagen 1 de 3 Audiovox CDM-8900 Main LCD Screen Replacement: paso 3, imagen 2 de 3 Audiovox CDM-8900 Main LCD Screen Replacement: paso 3, imagen 3 de 3
    • WARNING: The small electronic components inside the phone are fragile; take care not to damage them when completing this step.

    • Wedge one of the plastic opening tools under the faceplate near the hinge.

    • Insert the second plastic opening tool under the faceplate and slide it around the perimeter, detaching the faceplate from the phone.

  4. Audiovox CDM-8900 Main LCD Screen Replacement: paso 4, imagen 1 de 3 Audiovox CDM-8900 Main LCD Screen Replacement: paso 4, imagen 2 de 3 Audiovox CDM-8900 Main LCD Screen Replacement: paso 4, imagen 3 de 3
    • Slide out the two metal braces located along the sides of the LCD screen.

    • A piece of tape is attached beneath each metal brace; after removing the braces, carefully peel back the tape from both sides of the copper frame.

  5. Audiovox CDM-8900 Main LCD Screen Replacement: paso 5, imagen 1 de 2 Audiovox CDM-8900 Main LCD Screen Replacement: paso 5, imagen 2 de 2
    • WARNING: Do not detach or tear any wires when completing this step.

    • Using the spudger, carefully separate the black discs (speaker and microphone) from the inside surface of the phone.

    • Note: The smaller black disc is glued down, so you may need to use some force to detach it. Both disks will still remain attached via wires.

  6. Audiovox CDM-8900 Main LCD Screen Replacement: paso 6, imagen 1 de 2 Audiovox CDM-8900 Main LCD Screen Replacement: paso 6, imagen 2 de 2
    • WARNING: The copper frame is attached to the phone at the hinge. Do not tear the frame.

    • Gently lift the copper frame surrounding the LCD screen.

  7. Audiovox CDM-8900 Main LCD Screen Replacement: paso 7, imagen 1 de 2 Audiovox CDM-8900 Main LCD Screen Replacement: paso 7, imagen 2 de 2
    • With the copper screen lifted up, gently pull out the ribbon connector and lift out the LCD screen.

  8. Audiovox CDM-8900 Main LCD Screen Replacement: paso 8, imagen 1 de 2 Audiovox CDM-8900 Main LCD Screen Replacement: paso 8, imagen 2 de 2
    • Insert the ribbon connector of the new LCD screen into the slot in which the old LCD screen was attached.

    • Press the new LCD screen into place and lower the copper frame back down.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Aaron Shaw

Miembro Desde 04/15/10

159 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 28-31, Regan Spring 2010 Miembro de Cal Poly, Team 28-31, Regan Spring 2010

CPSU-REGAN-S10S28G31

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 4,107