Repara tus cosas

Derecho a reparar

Tienda

Audio Technica ATH-AD500 Right Headphone Cable Replacement

Escrito Por: Melanie Reis (y 7 de otros participantes)
  • Comentarios: 3
  • Favoritos: 4
  • Terminaciones: 2

Dificultad

Difícil

Pasos

5

Tiempo Requerido

20 - 30 minutos

Secciones

2

Banderas

0

Introducción

This repair guide will help you with the following:

  • install the right headphone cable
  • fix sound in right ear

  1. Remove the ear pads by peeling them away from the grill.

    • Remove the ear pads by peeling them away from the grill.

    Editar

  2. Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.

    • Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.

    Editar

  3. El kit de herramientas esencial

    Las herramientas más útiles en nuestro kit más compacto.

    Compra ahora

    El kit de herramientas esencial

    Las herramientas más útiles en nuestro kit más compacto.

    Compra ahora

  4. Remove the speaker from the grill by pulling it out.

    • Remove the speaker from the grill by pulling it out.

    • Remove the speaker carefully so you do not rip the wires out.

    Editar

  5. Remove the wires by de-soldering both the red and yellow wires using the soldering iron and desoldering wick. If you need assistance, reference Cómo soldar y desoldar conexiones. The areas where you soldered will be hot so let the soldered joints cool for before handling again.

    • Remove the wires by de-soldering both the red and yellow wires using the soldering iron and desoldering wick. If you need assistance, reference Cómo soldar y desoldar conexiones.

    • The areas where you soldered will be hot so let the soldered joints cool for before handling again.

    Editar

  6. Connect the the new red and yellow wires by re-soldering the wires using the soldering iron. If you need assistance, reference Cómo soldar y desoldar conexiones. The areas where you soldered will be hot so let the soldered joints cool for before handling again.

    • Connect the the new red and yellow wires by re-soldering the wires using the soldering iron. If you need assistance, reference Cómo soldar y desoldar conexiones.

    • The areas where you soldered will be hot so let the soldered joints cool for before handling again.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 7 otros colaboradores

Melanie Reis

Miembro Desde 11/01/13

146 Reputación

5 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

Cal Poly, Team 17-19, Forte Winter 2013 Miembro de Cal Poly, Team 17-19, Forte Winter 2013

CPSU-FORTE-W13S17G19

6 Miembros

6 Guías creadas

Un Comentario

Agregar un comentario

Where can i buy a replacement cable? Cant seem to find it anywhere.

Stefan Rasmussen - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 6

Ultimos 30 días: 32

Todo El Tiempo: 3,578