Repara tus cosas Comunidad Tienda

Audio Technica ATH-AD500 Driver Replacement

Introducción

This guide will help your install a new driver.

Qué necesitas

  1. Audio Technica ATH-AD500 Driver Replacement, Speaker Assembly: paso 1, imagen 1 de 1

    • Remove the ear pads by peeling them away from the grill.

    Editar

  2. Audio Technica ATH-AD500 Driver Replacement: paso 2, imagen 1 de 1

    • Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.

    Editar

  3. Audio Technica ATH-AD500 Driver Replacement: paso 3, imagen 1 de 1

    • Remove the speaker from the grill by pulling it out.

    • Remove the speaker carefully so you do not rip the wires out.

    Editar

  5. Audio Technica ATH-AD500 Driver Replacement, Driver: paso 4, imagen 1 de 1

    • With a #0 phillips head, unscrew the three, 1 cm screws which are holding the driver (red wafer) in its bracket.

    Editar

  6. Audio Technica ATH-AD500 Driver Replacement: paso 5, imagen 1 de 1

    • Pull the driver out of its bracket.

    Editar

  7. Audio Technica ATH-AD500 Driver Replacement: paso 6, imagen 1 de 2 Audio Technica ATH-AD500 Driver Replacement: paso 6, imagen 2 de 2

    • Remove the two wires, red and yellow, by de-soldering them from the driver using a soldering iron and desoldering wick. Reference Cómo soldar y desoldar conexiones.

    • The areas where you solder will be hot so wait until the solder joints are cool before handling the wires again.

    Editar

  8. Audio Technica ATH-AD500 Driver Replacement: paso 7, imagen 1 de 2 Audio Technica ATH-AD500 Driver Replacement: paso 7, imagen 2 de 2

    • Connect the existing wires to the new driver by re-soldering the wires using the soldering iron.

    • Using the copper as a reference, re-solder the yellow wire to the top left solder joint and the red to the bottom left solder joint.

    • The areas where you solder will be hot so wait until the solder joints are cool before handling the wires again.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 8 otros colaboradores

Nick Levy

Miembro Desde 01/13/13

177 Reputación

1 Guía escrita

Insignias: 10

+ 7 más insignias

Equipo

Cal Poly, Team 17-19, Forte Winter 2013 Miembro de Cal Poly, Team 17-19, Forte Winter 2013

CPSU-FORTE-W13S17G19

6 Miembros

17 Guías creadas

2 comentarios

where can i buy a replacement driver?

acidxgangster - Contestar

You can order parts directly from PARTS@ATUS.COM

Nick Levy -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 9

Ultimos 30 días: 42

Todo El Tiempo: 10,865