1. Turn the laptop upside down and locate the ten screws holding in the plate cover.
    • Turn the laptop upside down and locate the ten screws holding in the plate cover.

    • Remove all ten screws using a PH00 screwdriver.

  2. Once the screws are out, open up the laptop and use the plastic opening tool on the keyboard and the back to pry it open.
    • Once the screws are out, open up the laptop and use the plastic opening tool on the keyboard and the back to pry it open.

    • Separate the keyboard from the computer to expose the inside of the computer.

    • Flip up the white connector.

    • Take the blue cable out of the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 25

Todo El Tiempo: 50