Asus X502CA-BCL0901D Webcam Replacement

Introducción

If the laptop gets dropped or bumped too hard the webcam cables may become disconnected or the webcam may break. This guide will show you how to replace it.

Qué necesitas

Paso 1 Screen Frame

Asus X502CA-BCL0901D Webcam Replacement, Screen Frame: paso 1, imagen 1 de 2

Asus X502CA-BCL0901D Webcam Replacement, Screen Frame: paso 1, imagen 2 de 2

Herramienta utilizada en este paso:

Tweezers

$4.99

Comprar

Using the tweezers, remove the 2 black plastic adhesive covers from the bottom corners of the screen frame.

Editar

Paso 2

Use the Philips #00 screwdriver to remove the 2 screws that were revealed in the previous step.
The screws are 20 mm in diameter and 50 mm long.

Editar

Paso 3

Using the plastic opening tool, pry the screen frame away from the screen.

Editar

Paso 4

Using your hands, grasp the screen frame at it's base near the laptop hinge.
While pulling the base of the screen frame away from the hinge horizontally, also lift up on the screen frame to disconnect it from the laptop hinge.
The space between the screen frame and laptop hinge is very small and the plastic for both parts is weak. However, a fair amount of force is required to disconnect the screen frame from the laptop hinge. Be careful during this step, or either of these plastic pieces may break.

Editar

Paso 5 Webcam

Asus X502CA-BCL0901D Webcam Replacement, Webcam: paso 5, imagen 1 de 1

Herramienta utilizada en este paso:

Tweezers

$4.99

Comprar

Using tweezers, unplug the webcam wire from the webcam.
If this wire was already disconnected, that may be the cause of the webcam not functioning. Try reconnecting this wire and reassembling to see if the problem is resolved before continuing.