Repara tus cosas Comunidad Tienda

Asus X200MA Fan Replacement

Qué necesitas

  1. Asus X200MA Fan Replacement, Back Panel: paso 1, imagen 1 de 1

    • Remove the following six screws:

    • Six 4 mm screws using a Phillips #0 screwdriver.

    • Remove the following one screw:

    • One 14 mm screw using a Phillips #0 screwdriver.

    • The 14mm screw goes in the center.

    Editar

  2. Asus X200MA Fan Replacement: paso 2, imagen 1 de 1

    • Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

    Editar

  3. Asus X200MA Fan Replacement, Battery: paso 3, imagen 1 de 1

    • Take two rubber caps off the back side of the laptop.

    Editar

  4. Asus X200MA Fan Replacement: paso 4, imagen 1 de 1

    • Remove the following two screws under the rubber caps.

    • Two 14 mm screws using the Phillips #0 screw driver.

    Editar

  6. Asus X200MA Fan Replacement: paso 5, imagen 1 de 1

    • Flip up the following:

    • The two latches holding the two cables shown(white and black)

    • Pull the cables free from the latches

    • Lift the keyboard from the computer

    Editar

  7. Asus X200MA Fan Replacement: paso 6, imagen 1 de 1

    • Remove the following screws from the inside of the laptop:

    • Two 4 mm screws using the Phillips #0 phillips screwdriver.

    • One 5 mm screw using the Phillips #0 Phillips screwdriver located in the center a little below the battery.

    Editar

  8. Asus X200MA Fan Replacement: paso 7, imagen 1 de 1

    • Slide the battery up and out.

    Editar

  9. Asus X200MA Fan Replacement, Fan: paso 8, imagen 1 de 1

    • Remove the Two 4 mm screws using Phillips #0 phillips screwdriver.

    Editar

  10. Asus X200MA Fan Replacement: paso 9, imagen 1 de 2 Asus X200MA Fan Replacement: paso 9, imagen 2 de 2

    • Unplug the set of wires located at bottom corner on fan.

    Editar

  11. Asus X200MA Fan Replacement: paso 10, imagen 1 de 2 Asus X200MA Fan Replacement: paso 10, imagen 2 de 2

    • Lift up and out to completely the remove fan component.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Vanessa Garcia

Miembro Desde 01/22/15

1,763 Reputación

6 Guías creadas

Insignias: 19

+ 16 más insignias

Equipo

Cal Poly, Team 21-24, Maness Winter 2015 Miembro de Cal Poly, Team 21-24, Maness Winter 2015

CPSU-MANESS-W15S21G24

4 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 2,367