Saltar al contenido principal

Introducción

This guide well help the reader through the process of opening the device, removing the battery, then replacing it with a new one.

Partes

No se especificaron partes.

  1. Make sure the computer is turned off.
    • Make sure the computer is turned off.

    • Flip the device over so that the back cover is facing you.

  2. Remove the four 5mm Phillips #1 screws from the top of the laptop. Remove the two 6mm Phillips #1 screws from the sides of the laptop.
    • Remove the four 5mm Phillips #1 screws from the top of the laptop.

    • Remove the two 6mm Phillips #1 screws from the sides of the laptop.

    • Remove the four 2mm Phillips #1 screws from the bottom of the laptop.

  3. Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place. Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place. Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place.
    • Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place.

  4. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  5. Lift off the cover and remove the back cover from the device.
    • Lift off the cover and remove the back cover from the device.

  6. Using a Phillips #1 Screwdriver remove the six 3 mm screws keeping the battery in place. Using a Phillips #1 Screwdriver remove the six 3 mm screws keeping the battery in place.
    • Using a Phillips #1 Screwdriver remove the six 3 mm screws keeping the battery in place.

  7. Unplug the battery connector from the mother board. Unplug the battery connector from the mother board.
    • Unplug the battery connector from the mother board.

  8. Gently remove the battery from the slot. Gently remove the battery from the slot.
    • Gently remove the battery from the slot.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

USF Tampa, Team S10-G3, Thompson Fall 2017 Miembro de USF Tampa, Team S10-G3, Thompson Fall 2017

USFT-THOMPSON-F17S10G3

4 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 41

Últimos 30 Días: 114

Todo El Tiempo: 469