Asus VivoTab Note 8 DC Board Replacement

Introducción

This is a step-by-step guide to replacing the DC board in your Asus VivoTab Note 8. The DC board in the Asus VivoTab Note 8 allows you to hear audio straight from the device, and if not in proper shape, may lack quality. This guide will help you replace it if it is broken or damaged, and there are no soldering or special skills required.

Qué necesitas

Paso 1 Back Panel

Asus VivoTab Note 8 DC Board Replacement, Back Panel: paso 1, imagen 1 de 1

Remove the pen and memory card if you have them; they may get in the way when you are opening the device.
Pry open the edges of the cover using the plastic opening tool. The memory card slot is very useful for getting started.

Traducir

Paso 2

Move the opening tool along the edges of the tablet and push up wherever you can. You may need to open up all of the sides to take the panel off.
Pull apart the sides of the casing by hand.

Traducir

Paso 3

After pulling the panel off, put it to the side.

Traducir

Paso 4 Motherboard

Asus VivoTab Note 8 DC Board Replacement, Motherboard: paso 4, imagen 1 de 1

Unplug the battery from the motherboard.
Lodge something (a fingernail works fine) under the connecting piece and apply a force straight up and perpendicular to the back of the device.

Traducir

Paso 5

Remove the screws from the black plastic restraint restricting the motherboard's movement using a Phillips #000 screwdriver.
Gently remove the black plastic restraint from the motherboard.

Traducir