Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the JIS #0 Screwdriver, unscrew the ten 10 mm screws that hold the back casing in place
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the flat edge of the opening tool in between the back casing to remove the back casing.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the JIS #0 Screwdriver, remove the five 3.0 mm screws that hold down the hard drive casing.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the hard drive up and remove the power supply cable connected to it.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the white and black wires attached to the Wi-Fi chip.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two adapters connecting the display to the motherboard by pulling the black plastic straps directly upwards.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the JIS #0 screwdriver to remove the five 5.0 mm screws connecting the display to the rest of the laptop.
-