Repara tus cosas Comunidad Tienda

Asus VivoBook Q200E-BSI3T08 Battery Replacement

Introducción

The Asus Q200E has its battery inside the casing, but the battery is still fairly easy to replace.

Qué necesitas

  1. Asus VivoBook Q200E-BSI3T08 Battery Replacement, Back Panel: paso 1, imagen 1 de 1

    • Turn off the computer and unplug the charge cable.

    • If the computer is on or plugged in, it could cause electric shock.

    • Turn the computer upside down.

    Editar

  2. Asus VivoBook Q200E-BSI3T08 Battery Replacement: paso 2, imagen 1 de 1

    • Remove the nine Philips #00 screws holding the back panel in place (four 5.6mm, four 7.7mm, and one 9.2mm).

    Editar

  4. Asus VivoBook Q200E-BSI3T08 Battery Replacement: paso 3, imagen 1 de 2 Asus VivoBook Q200E-BSI3T08 Battery Replacement: paso 3, imagen 2 de 2

    • Use a plastic opening tool to gently remove the back panel.

    Editar

  5. Asus VivoBook Q200E-BSI3T08 Battery Replacement, Battery: paso 4, imagen 1 de 1

    • Remove the eight 4.7mm Philips #00 screws holding the battery in place.

    Editar

  6. Asus VivoBook Q200E-BSI3T08 Battery Replacement: paso 5, imagen 1 de 3 Asus VivoBook Q200E-BSI3T08 Battery Replacement: paso 5, imagen 2 de 3 Asus VivoBook Q200E-BSI3T08 Battery Replacement: paso 5, imagen 3 de 3

    • The battery is attached by a set of wires.

    • Use your finger to disconnect the set of wires. It should come off very easily.

    Editar

  7. Asus VivoBook Q200E-BSI3T08 Battery Replacement: paso 6, imagen 1 de 2 Asus VivoBook Q200E-BSI3T08 Battery Replacement: paso 6, imagen 2 de 2

    • Now just lift the battery out of place.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

14 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Maxim

Miembro Desde 01/21/15

462 Reputación

1 Guía escrita

Insignias: 11

+ 8 más insignias

Equipo

UWT Liner: Group 6 Miembro de UWT Liner: Group 6

Community

3 Miembros

1 Guía escrita

2 comentarios

Super helpful instructions. Especially mentioning which screws were different sizes, so I knew to keep the 3 different sizes for the back cover separated and noted which sizes went back where. Many thanks!

Albert Einstein - Contestar

Great guide. Thanks!

weston.fisher - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 13

Todo El Tiempo: 7,333