Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place the computer upside down.
-
Using your thumbs, slide both latches away from each other (towards the outside).
-
Push the battery out with your fingers.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
On the back panel unscrew highlighted screws and carefully put them to the side as not to lose them.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the RAM chip and the two metal tabs holding it in place.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully use your thumbs to push out the metal tabs and the RAM should spring up.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
After the ram has sprung up, carefully grab the edges with your fingers and gently pull straight out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
After you have gotten either more RAM or replacement RAM line up the pins and slot (highlighted red) in the RAM card with the pin on the computer.
-
The other side of the RAM slot is a place for more RAM if you want to put more in.
-