Flip the computer over so that it is upside down.
  • Flip the computer over so that it is upside down.

  • Slide both latches away from each other (towards the outside).

  • Push the battery out with your fingers.

  • The actual battery is not shown in the photograph.

Agregar Comentario

On the back panel unscrew highlighted screws and carefully put them to the side as not to lose them.
  • On the back panel unscrew highlighted screws and carefully put them to the side as not to lose them.

Agregar Comentario

  • Locate the RAM chip highlighted in Blue and the two metal tabs holding it in place highlighted in red.

Agregar Comentario

  • Carefully use your thumbs to push out the metal tabs and the RAM should spring up.

Agregar Comentario

  • After the ram has sprung up, carefully grab the edges with your fingers and gently pull straight out.

Agregar Comentario

  • After you have gotten either more RAM or replacement RAM line up the pins and slot (highlighted red) in the RAM card with the pin on the computer.

  • Carefully insert the new ram in at the same angle that you removed it at.

  • The other side of the RAM slot is a place for more RAM if you want to put more in. The spaces are highlighted in blue.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Connor

Miembro Desde 24/06/10

36 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 2-9, Johann Summer 2010 Miembro de Cal Poly, Team 2-9, Johann Summer 2010

CPSU-JOHANN-R10S2G9

5 Miembros

11 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 3,122