Repara tus cosas Comunidad Tienda

Asus RT-N56U Disassembly

Introducción

The Asus RT-N56U Wireless Router was released in Early 2011. It featured both 2.4GHz and 5GHz wireless networking, 2 USB 2.0 Ports, 4 Ethernet Ports, and a thin & stylish design!

Qué necesitas

  1. Asus RT-N56U Disassembly, Stand Removal: paso 1, imagen 1 de 3 Asus RT-N56U Disassembly, Stand Removal: paso 1, imagen 2 de 3 Asus RT-N56U Disassembly, Stand Removal: paso 1, imagen 3 de 3

    • If the stand is slotted into the bottom, flip the router upside down and gently pull right to remove it.

    Editar

  2. Asus RT-N56U Disassembly, Peeling Sticker: paso 2, imagen 1 de 3 Asus RT-N56U Disassembly, Peeling Sticker: paso 2, imagen 2 de 3 Asus RT-N56U Disassembly, Peeling Sticker: paso 2, imagen 3 de 3

    • Work carefully to peel the label on the back side off.

    • Try not to damage the label, as it can be important later.

    Editar

  4. Asus RT-N56U Disassembly, Case Screws: paso 3, imagen 1 de 3 Asus RT-N56U Disassembly, Case Screws: paso 3, imagen 2 de 3 Asus RT-N56U Disassembly, Case Screws: paso 3, imagen 3 de 3

    • Unscrew the 2 Phillips screws securing the front casing in place.

    Editar

  5. Asus RT-N56U Disassembly, Plastic Clips & Adhesive: paso 4, imagen 1 de 3 Asus RT-N56U Disassembly, Plastic Clips & Adhesive: paso 4, imagen 2 de 3 Asus RT-N56U Disassembly, Plastic Clips & Adhesive: paso 4, imagen 3 de 3

    • Remove the adhesive and clips also securing the front casing and lift it like a book from the left side, then remove it.

    Editar

  6. Asus RT-N56U Disassembly, Board Screws: paso 5, imagen 1 de 3 Asus RT-N56U Disassembly, Board Screws: paso 5, imagen 2 de 3 Asus RT-N56U Disassembly, Board Screws: paso 5, imagen 3 de 3

    • Remove the 2 Phillips screws securing the main board to the casing.

    Editar

  7. Asus RT-N56U Disassembly, Removing the Board: paso 6, imagen 1 de 3 Asus RT-N56U Disassembly, Removing the Board: paso 6, imagen 2 de 3 Asus RT-N56U Disassembly, Removing the Board: paso 6, imagen 3 de 3

    • Lift to around a 20° angle.

    • Gently pull up slightly, then the board should unlock to allow you to rotate it to around a 90° angle and remove it.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

afixer

Miembro Desde 04/14/23

201 Reputación

1 Guía escrita

Insignias: 7

+ 4 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 11

Todo El Tiempo: 183