Repara tus cosas Comunidad Tienda

Asus ROG Strix GL702VS Back Cover Replacement

Introducción

This simple guide will be used in almost every step involved in repairing the computer. You will need to remove the bottom cover to access all of the components of the computer. This should be done in a contained well-lit setting since the small screws may be easy to lose in low light settings.

Qué necesitas

  1. Asus ROG Strix GL702VS Back Cover Replacement, Back Cover: paso 1, imagen 1 de 1

    • Flip the computer so the bottom of the laptop is facing up.

    Traducir

  2. Asus ROG Strix GL702VS Back Cover Replacement: paso 2, imagen 1 de 1

    • Remove the ten JIS #0 screws around the edge of the laptop.

    • The two bottom screws are slightly shorter

    Traducir

  4. Asus ROG Strix GL702VS Back Cover Replacement: paso 3, imagen 1 de 2 Asus ROG Strix GL702VS Back Cover Replacement: paso 3, imagen 2 de 2

    • Use a Jimmy to carefully free each side of the bottom casing.

    Traducir

  5. Asus ROG Strix GL702VS Back Cover Replacement: paso 4, imagen 1 de 1

    • Lift up the back casing from the computer.

    • You may hear clicking or snapping sounds. This is just the plastic clips coming loose.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 5

Ultimos 30 días: 21

Todo El Tiempo: 1,330