Saltar al contenido principal

Introducción

Use this guide to replace the hard drive in your device.

Partes

No se especificaron partes.

  1. Lift up the rubber tab located in the upper-right corner of the backing plate.
    • Lift up the rubber tab located in the upper-right corner of the backing plate.

  2. Use a Phillips #1 screwdriver to remove the 5.2 mm screw behind the rubber tap.
    • Use a Phillips #1 screwdriver to remove the 5.2 mm screw behind the rubber tap.

  3. Carefully pull the backing plate off. If you have a pry tool, you can pry on the edges carefully.
    • Carefully pull the backing plate off. If you have a pry tool, you can pry on the edges carefully.

  4. Use a Phillips  head screwdriver to remove the four 2.4 mm screws from the hard drive mount.
    • Use a Phillips head screwdriver to remove the four 2.4 mm screws from the hard drive mount.

    • Remove the hard drive from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Anum Haidari

Miembro Desde 22/10/18

533 Reputación

3 Guías creadas

Equipo

UC Davis, Team S7-G4, Lore Fall 2018 Miembro de UC Davis, Team S7-G4, Lore Fall 2018

UCD-LORE-F18S7G4

2 Miembros

3 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 6

Todo El Tiempo: 76