Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift up the rubber tab located in the upper-right corner of the backing plate.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips #1 screwdriver to remove the 5.2 mm screw behind the rubber tap.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully pull the backing plate off. If you have a pry tool, you can pry on the edges carefully.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips #1 screwdriver to remove the 5 mm screw.
-