Herramientas

No se requieren herramientas.

Partes

  1. With your right hand, push the latch completely up to where you can see the battery pop slightly up. Pick and pull at the tab with your left hand. You can now fully remove the battery from the device. You can now fully remove the battery from the device.
    • With your right hand, push the latch completely up to where you can see the battery pop slightly up. Pick and pull at the tab with your left hand.

    • You can now fully remove the battery from the device.

  2. Remove the large flathead screw holding the back cover in place. Pull the cover off by prying it open starting from the top center and moving outwards.
    • Remove the large flathead screw holding the back cover in place.

    • Pull the cover off by prying it open starting from the top center and moving outwards.

  3. Remove the eight short screws holding in the two metal covers near the bottom. Remove the two metal covers.
    • Remove the eight short screws holding in the two metal covers near the bottom.

    • Remove the two metal covers.

  4. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  5. Remove the battery to access the screws under it. Remove these 16 screws with a regular Phillips head screw-driver.
    • Remove the battery to access the screws under it.

    • Remove these 16 screws with a regular Phillips head screw-driver.

    • These Phillips head screws will require a longer bit or an extension.

  6. Flip the device back over. Pull off the plastic cover behind the screen.
    • Flip the device back over.

    • Pull off the plastic cover behind the screen.

    • Remove the four Phillips head screws holding the screen in place.

  7. With the screen removed, pry the piece that has the keyboard and the track pad on it. With the screen removed, pry the piece that has the keyboard and the track pad on it.
    • With the screen removed, pry the piece that has the keyboard and the track pad on it.

  8. Remove the two Phillips head screws holding the buttons in place. Remove the two Phillips head screws holding the buttons in place.
    • Remove the two Phillips head screws holding the buttons in place.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 37