Saltar al contenido principal

Introducción

Replace a broken or messed up CD-Drive.

Before starting on this guide, unplug the laptop from its charger and turn the laptop off.

Partes

No se especificaron partes.

  1. Push the slider to the opposite side, while pulling out the battery. Remove the battery from the device.
    • Push the slider to the opposite side, while pulling out the battery.

    • Remove the battery from the device.

  2. Remove the 4 mm screw on the cover using a Phillips #0 screwdriver.
    • Remove the 4 mm screw on the cover using a Phillips #0 screwdriver.

    • Remove the cover for the hard drive by pushing down and sliding it towards yourself.

  3. Slide the hard drive to left and remove it from the device.
    • Slide the hard drive to left and remove it from the device.

  4. Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora

    Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora
  5. Unscrew the four 4mm screws using a Phillips #0 screwdriver.
    • Unscrew the four 4mm screws using a Phillips #0 screwdriver.

  6. Flip the computer right side up and start to lift the keyboard. The keyboard/back panel should come off.
    • Flip the computer right side up and start to lift the keyboard. The keyboard/back panel should come off.

    • Do not force the keyboard/back panel off. This could damage internal components and bend the keyboard.

  7. Using a Phillips #0 screwdriver, unscrew the four 4mm screws.
    • Using a Phillips #0 screwdriver, unscrew the four 4mm screws.

  8. Gently pull the CD drive out of the side of the laptop and remove it from the device.
    • Gently pull the CD drive out of the side of the laptop and remove it from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 5

Todo El Tiempo: 125