Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the 10 screws around the edge of the back panel. Eight of the screws are 0.0793mm T5 , two of them are 0.0793 JIS #0.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the plastic opening tool to pry the back panel off the base of the laptop.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Un-clip both wire clips on the upper and right side of the battery.
-
Lift the battery out of the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift up the sticker that sticks between the motherboard and the optical drive. Then, unscrew the one screw where it is marked and slide it out gently.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the fan by unscrewing the nine screws shown in the images.
-
The four colored wire and the black cable need to be pulled out gently.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the seven screws Phillips Head 0.0793 MM on the edges of the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect any cables that hold the motherboard.
-
Open up the white adjustable latch first to pull out the tapes.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
Un comentario
Thanks for posting this guide. Helped me to fix this model computer for a friend. Very well done!