Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the 10 screws around the edge of the back panel. Eight of the screws are 0.0793mm T5 , two of them are 0.0793 JIS #0.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the plastic opening tool to pry the back panel off the base of the laptop.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Un-clip both wire clips on the upper and right side of the battery.
-
Lift the battery out of the device.
-
Cancelar: No complete esta guía.
4 personas más completaron esta guía.
Un comentario
Is there a part to order if the solder gives from the mother board connection peice. My cable came up from the board with connection still attached