Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a T4 Torx screwdriver head to remove the ten 4mm Torx head screws on the bottom of the laptop.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use an opening tool to pry open the rear cover. Lift the cover off and away from the board.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips #0 screwdriver head to remove the three black 7mm Phillips head screws that hold the battery in place.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once the screws have been removed, gently lift the battery out.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.