Saltar al contenido principal

Introducción

This guide will go over the process of removing and replacing the CPU fan and heat sink assembly.

Partes

No se especificaron partes.

  1. Asus Q534U CPU Fan/Heat Sink Replacement, Back Case Removal: paso 1, imagen 1 de 1
    • Make sure the device is turned off and unplugged from the charger.

    • Using a T5 screwdriver, remove all 10 screws located on the underside of the laptop.

    • Pull off the back cover of the laptop.

    • A pry tool may be needed to pull off the back cover.

  2. Asus Q534U CPU Fan/Heat Sink Replacement: paso 2, imagen 1 de 2 Asus Q534U CPU Fan/Heat Sink Replacement: paso 2, imagen 2 de 2
    • Lift up the black tab next to the silver ribbon cable.

    • Pull lightly on the blue tabs until the silver cable is free.

  3. Asus Q534U CPU Fan/Heat Sink Replacement: paso 3, imagen 1 de 1
    • Using a Phillips #00 screwdriver, remove the 5 marked screws.

  4. Asus Q534U CPU Fan/Heat Sink Replacement: paso 4, imagen 1 de 2 Asus Q534U CPU Fan/Heat Sink Replacement: paso 4, imagen 2 de 2
    • Locate the battery connector.

    • Wedge a pry tool under the battery connector.

    • Gently pull on the connector until it disconnects from the base of the object.

    • Lift the battery out of the computer.

  5. Asus Q534U CPU Fan/Heat Sink Replacement, CPU Fan/Heat Sink: paso 5, imagen 1 de 2 Asus Q534U CPU Fan/Heat Sink Replacement, CPU Fan/Heat Sink: paso 5, imagen 2 de 2
    • Using the iFixit opening tool, gently pry the CPU fan connector out of the socket.

  6. Asus Q534U CPU Fan/Heat Sink Replacement: paso 6, imagen 1 de 2 Asus Q534U CPU Fan/Heat Sink Replacement: paso 6, imagen 2 de 2
    • Move the black cable located around the CPU fan out of the holder.

    • Remove the following 9 screws:

    • Three Phillips screws

    • Six Phillips screws

    • Make sure not to mix up both types of screws.

    • Gently pull vertically on the CPU fan/ heat sink assembly until it is free.

    • Before placing a new CPU fan/heat sink assembly, the CPU and GPU surfaces must be cleaned off and thermal compound must be reapplied.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

mmedina

Miembro Desde 07/04/16

665 Reputación

2 Guías creadas

Equipo

Un Comentario

Is it possible to replace the fan only without removing the full heatsink or is it fused together as one unit?

Bork Bois - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 11

Ultimos 30 días: 38

Todo El Tiempo: 2,406