Saltar al contenido principal

Introducción

This guide will help you replace the hard drive in case of hard drive failure or wanting to upgrade it. Be sure to follow this guide in a well lit room on a flat surface. Acquire the necessary tools before hand and have a cup or a magnetic plate to keep track of all the screws.

Partes

No se especificaron partes.

  1. Remove the ten 10mm Phillips #0 screws.
    • Remove the ten 10mm Phillips #0 screws.

  2. Use the iFixit opening tool to pry off the back cover of the laptop.
    • Use the iFixit opening tool to pry off the back cover of the laptop.

  3. Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora

    Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora
  4. Remove the four screws from the hard drive bracket. Remove the five 4 mm Phillips screws.
    • Remove the four screws from the hard drive bracket.

    • Remove the five 4 mm Phillips screws.

  5. Pull on this black connector piece to remove it from the hard drive. The second picture shows how things should look at this point.
    • Pull on this black connector piece to remove it from the hard drive.

    • The second picture shows how things should look at this point.

  6. Remove these two 4 mm Phillips screws holding the hard drive to the bracket. Repeat on the other side of the bracket.
    • Remove these two 4 mm Phillips screws holding the hard drive to the bracket. Repeat on the other side of the bracket.

    • Pull the HD from its housing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Houston Koontz

Miembro Desde 06/11/18

307 Reputación

2 Guías creadas

Equipo

IUPUI, Team S1-G2, Hovde Fall 2018 Miembro de IUPUI, Team S1-G2, Hovde Fall 2018

IUPUI-HOVDE-F18S1G2

3 Miembros

3 Guías creadas

Agregar Comentario

Ver Estadísticas:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

Todo El Tiempo: 159