Saltar al contenido principal

Introducción

Many of the Asus F554LA-WS52 notebook's components take several steps to remove and replace. This sequential guide shows the necessary steps. For this guide, you will need a plastic opening tool and a Phillips #00 screwdriver head.

Partes

No se especificaron partes.

  1. Make sure the notebook is off and has been unplugged from any power source. Flip the notebook over and remove the 10 screws from the back plate with a #0 Phillips head screwdriver.
    • Make sure the notebook is off and has been unplugged from any power source.

    • Flip the notebook over and remove the 10 screws from the back plate with a #0 Phillips head screwdriver.

    • Six (6) will be 9.6mm and four (4) will be 12.7mm.

  2. With a plastic opening tool, gently lift and remove the back cover to expose the internal components. (Not pictured) Remove the three cables attached to the keyboard and one touch-pad. (Not pictured) Remove the three cables attached to the keyboard and one touch-pad.
    • With a plastic opening tool, gently lift and remove the back cover to expose the internal components.

    • (Not pictured) Remove the three cables attached to the keyboard and one touch-pad.

  3. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  4. Unscrew the three 5.7 mm hard drive-motherboard connection screws with a #0 Phillips head screwdriver. Remove the small rectangular hard drive-motherboard connection board.
    • Unscrew the three 5.7 mm hard drive-motherboard connection screws with a #0 Phillips head screwdriver.

    • Remove the small rectangular hard drive-motherboard connection board.

    • (Not pictured) Remove the hard drive.

  5. Unscrew the four 5.7 mm battery screws   with a #0 Phillips head screwdriver. Remove the battery.
    • Unscrew the four 5.7 mm battery screws with a #0 Phillips head screwdriver.

    • Remove the battery.

  6. Unscrew the two 2.7 mm and one 5.7 mm CD drive screws with the Phillips #00 screwdriver. With the plastic opening tool, gently pry the drive out from the metal brackets that hold it in place. With the plastic opening tool, gently pry the drive out from the metal brackets that hold it in place.
    • Unscrew the two 2.7 mm and one 5.7 mm CD drive screws with the Phillips #00 screwdriver.

    • With the plastic opening tool, gently pry the drive out from the metal brackets that hold it in place.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Aaron Ratliff

Miembro Desde 09/10/18

497 Reputación

4 Guías creadas

Equipo

USF Tampa, Team S1-G2, Leahy Fall 2018 Miembro de USF Tampa, Team S1-G2, Leahy Fall 2018

USFT-LEAHY-F18S1G2

4 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 9

Todo El Tiempo: 142