Saltar al contenido principal

Introducción

This guide will help you replace your Asus EeeBook X205TA trackpad in case it is damaged, not working, or worn out. If disposing trackpad, please follow the laws and regulations for proper disposal.

  1. Remove ten Phillips #00 screws located on the bottom of the laptop: Seven short screws.
    • Remove ten Phillips #00 screws located on the bottom of the laptop:

    • Seven short screws.

    • Three long screws.

  2. Insert the plastic opening tool in the crevice between the back of the laptop and the rest of the case (where the hinge is).
    • Insert the plastic opening tool in the crevice between the back of the laptop and the rest of the case (where the hinge is).

    • Carefully pry open the case from several points.

    • Slowly remove the back of the laptop, revealing the parts inside.

  3. Using the 2mm Phillips Screwdriver, carefully unscrew the four screws holding the track pad. Using the Phillips #00 Screwdriver, unscrew the three screws holding the track pad.
    • Using the 2mm Phillips Screwdriver, carefully unscrew the four screws holding the track pad.

    • Using the Phillips #00 Screwdriver, unscrew the three screws holding the track pad.

  4. Unplug the ZIF connector
    • Unplug the ZIF connector

  5. Carefully pull the track pad from the side
    • Carefully pull the track pad from the side

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Equipo

USF Tampa, Team 2-2, Sullivan Fall 2016 Miembro de USF Tampa, Team 2-2, Sullivan Fall 2016

USFT-SULLIVAN-F16S2G2

3 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 34

Todo El Tiempo: 1,078