Saltar al contenido principal

Introducción

If you are having troubles with your hard drive, this guide will teach you how to remove and replace it.

Partes

No se especificaron partes.

  1. Use a plastic opening tool and carefully pry the top panel from the base. Use a plastic opening tool and carefully pry the top panel from the base.
    • Use a plastic opening tool and carefully pry the top panel from the base.

  2. Slowly lift the keyboard from the base. Disconnect the attached ribbon from under the keyboard. Disconnect the attached ribbon from under the keyboard.
    • Slowly lift the keyboard from the base.

    • Disconnect the attached ribbon from under the keyboard.

  3. Remove the keyboard.
    • Remove the keyboard.

  4. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  5. Lay the laptop with the back facing up. With a Phillips #0 screwdriver, remove the eight 6mm screws on the back of the laptop.
    • Lay the laptop with the back facing up.

    • With a Phillips #0 screwdriver, remove the eight 6mm screws on the back of the laptop.

  6. Slide the tabs outward to remove the battery. Slide the tabs outward to remove the battery. Slide the tabs outward to remove the battery.
    • Slide the tabs outward to remove the battery.

  7. Flip the device so that you are facing the screen. Remove the ten 4mm screws on the silver panel under the keyboard using a Phillips #0 screwdriver.
    • Flip the device so that you are facing the screen.

    • Remove the ten 4mm screws on the silver panel under the keyboard using a Phillips #0 screwdriver.

  8. Using a plastic opening tool, remove the top panel of the laptop. Using a plastic opening tool, remove the top panel of the laptop. Using a plastic opening tool, remove the top panel of the laptop.
    • Using a plastic opening tool, remove the top panel of the laptop.

  9. Using a Phillips #0 screwdriver, remove the four 4mm screws connecting the hard drive. Using a Phillips #0 screwdriver, remove the four 4mm screws connecting the hard drive.
    • Using a Phillips #0 screwdriver, remove the four 4mm screws connecting the hard drive.

  10. Remove and replace the hard drive.
    • Remove and replace the hard drive.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Katherine Chan

Miembro Desde 22/10/18

329 Reputación

2 Guías creadas

Equipo

UC Davis, Team S7-G3, Lore Fall 2018 Miembro de UC Davis, Team S7-G3, Lore Fall 2018

UCD-LORE-F18S7G3

3 Miembros

2 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 4

Últimos 30 Días: 7

Todo El Tiempo: 77