Saltar al contenido principal

Asus Eee PC 1008ha Trackpad Mouse Clicker Replacement

Qué necesitas

  1. Asus Eee PC 1008ha Trackpad Mouse Clicker Replacement, Trackpad Mouse Clicker (the button's on the bottom of the trackpad): paso 1, imagen 1 de 1
    • Use an opening too to carefully separate the palm rest assembly from the base of the laptop.

    • Move the opening tool around the perimeter of the palm rest and the base and use it as a wedge.

    • You will need to undo the clips holding the two parts together with the opening tool. Be careful not to break the clips.

  2. Asus Eee PC 1008ha Trackpad Mouse Clicker Replacement: paso 2, imagen 1 de 2 Asus Eee PC 1008ha Trackpad Mouse Clicker Replacement: paso 2, imagen 2 de 2
    • Use a spudger to open the cable locks and remove the ribbon cables using your hands or tweezers.

    • Using a Phillips #00 screwdriver, remove the two 4 mm screws on either side of the circuit board.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Michael Dooley

Miembro Desde 04/18/13

138 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 21-52, Johann Spring 2013 Miembro de Cal Poly, Team 21-52, Johann Spring 2013

CPSU-JOHANN-S13S21G52

4 Miembros

11 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 889