Introducción

This guide will take you through the steps of replacing the screen.

Partes

No se requieren partes.

  1. Using the plastic opening tool, carefully pry the top panel from the base.
    • Using the plastic opening tool, carefully pry the top panel from the base.

    Agregar Comentario

  2. Lift the side of the keyboard.
    • Lift the side of the keyboard.

    • Disconnect the attached ribbon located underneath the keyboard.

    • Place your index finger in the hole on the right side of the keyboard tray and lift the tray.

    Agregar Comentario

    • Use your fingers to lift the battery and gently disconnect the wires from the base.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Using the Phillips #00 screwdriver, unscrew the 4mm screws from the rightmost circuit board.

    • Carefully pull the circuit board away from side of device base.

    Agregar Comentario

    • Using the Phillips #00 screwdriver, unscrew the 4mm screws attaching screen to base from both sides.

    • Gently lift the screen portion from the base.

    Agregar Comentario

    • Using the Plastic Opening Tool, pry the six small chits from the face of the screen portion.

    • Using the Phillips #00 screwdriver, unscrew the two 2mm and four 4mm screws from underneath the chits.

    Agregar Comentario

    • Slide the Plastic Opening Tool under the edge of the screen bezel to release the front panel of the screen.

    Agregar Comentario

    • Using the Phillips #00 screwdriver, unscrew the 2mm screws from the perimeter of the screen.

    • Use your fingers to hold the screen and carefully lift it from the base.

    Agregar Comentario

    • Use your fingers to peel back the adhesive tape located on the back of the screen.

    • Disconnect the wire from the screen.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Michael Dooley

Miembro Desde 18/04/13

132 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 21-52, Johann Spring 2013 Miembro de Cal Poly, Team 21-52, Johann Spring 2013

CPSU-JOHANN-S13S21G52

4 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 2,749