Saltar al contenido principal

Asus Eee PC 1005HA Screen Replacement

Qué necesitas

  1. Asus Eee PC 1005HA Screen Replacement, Battery: paso 1, imagen 1 de 1
    • Lay the laptop upside down.

    • Locate the two battery lock tabs.

  2. Asus Eee PC 1005HA Screen Replacement: paso 2, imagen 1 de 3 Asus Eee PC 1005HA Screen Replacement: paso 2, imagen 2 de 3 Asus Eee PC 1005HA Screen Replacement: paso 2, imagen 3 de 3
    • Slide the tabs outward to unlock the battery.

    • The left tab will remain unlocked, while the right tab must be held.

    • Holding the right tab open, slide the battery out of the laptop.

  3. Asus Eee PC 1005HA Screen Replacement, Screen: paso 3, imagen 1 de 3 Asus Eee PC 1005HA Screen Replacement, Screen: paso 3, imagen 2 de 3 Asus Eee PC 1005HA Screen Replacement, Screen: paso 3, imagen 3 de 3
    • Using tweezers, remove the six screw covers on the screen bezel.

    • Remove the six 4.6 mm screws from the bezel.

  4. Asus Eee PC 1005HA Screen Replacement: paso 4, imagen 1 de 1
    • Use a plastic opening tool to disengage the plastic clips that secure the screen bezel to the display.

    • Carefully remove the bezel from the display.

  5. Asus Eee PC 1005HA Screen Replacement: paso 5, imagen 1 de 3 Asus Eee PC 1005HA Screen Replacement: paso 5, imagen 2 de 3 Asus Eee PC 1005HA Screen Replacement: paso 5, imagen 3 de 3
    • Remove the four 3.6 mm screws securing the screen.

    • Slowly lift the screen up from the rest of the laptop.

    • The screen is still attached to the laptop by a set of cables. Be careful not to damage them while removing the screen.

  6. Asus Eee PC 1005HA Screen Replacement: paso 6, imagen 1 de 2 Asus Eee PC 1005HA Screen Replacement: paso 6, imagen 2 de 2
    • Remove the plastic tape securing the display cables to the back of the screen.

    • Slide the display cable connector out its socket on the back of the screen.

  7. Asus Eee PC 1005HA Screen Replacement: paso 7, imagen 1 de 2 Asus Eee PC 1005HA Screen Replacement: paso 7, imagen 2 de 2
    • Remove the four 3.1 mm housing screws on the sides of the display housing frame

    • Remove the housing frame.

Conclusión

To reassemble your device, follow these instructions in reverse order.

13 personas más completaron esta guía.

Equipo

Cal Poly, Team 11-22, Maness Winter 2012 Miembro de Cal Poly, Team 11-22, Maness Winter 2012

CPSU-MANESS-W12S11G22

3 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 34

Todo El Tiempo: 21,214