Repara tus cosas Comunidad Tienda

Astro A20 Speaker Replacement

Introducción

If the Astro A20 does not have any audio transmitting from the speaker then you will need to follow these steps to replace the speaker.

Qué necesitas

  1. Astro A20 Speaker Replacement, Cushion: paso 1, imagen 1 de 1

    • Place one hand on the hard side of the headset ear portion and on the cushion.

    • Lift the small portion on the edge of the cushion.

    Editar

  2. Astro A20 Speaker Replacement: paso 2, imagen 1 de 1

    • Slide the metal spudger underneath the lift part of the ear cushion.

    • Pull the ear cushion while wedging the spudge around the edge of the ear cushion.

    Editar

  4. Astro A20 Speaker Replacement: paso 3, imagen 1 de 2 Astro A20 Speaker Replacement: paso 3, imagen 2 de 2

    • Remove the ear cushion from the headset.

    Editar

  5. Astro A20 Speaker Replacement, Speaker: paso 4, imagen 1 de 1

    • Place your hand on the opposite side of the speaker.

    Editar

  6. Astro A20 Speaker Replacement: paso 5, imagen 1 de 2 Astro A20 Speaker Replacement: paso 5, imagen 2 de 2

    • Remove the four 7mm screws with a Phillips #1 screwdriver.

    • You may want to use a 60mm screwdriver extension to reach the screws inside of the headset.

    Editar

  7. Astro A20 Speaker Replacement: paso 6, imagen 1 de 2 Astro A20 Speaker Replacement: paso 6, imagen 2 de 2

    • Lift the speaker area.

    • Disconnect the wires connected to the speaker.

    • Wedge a spudger on the edge of the speaker and lift upwards to remove the speaker from the device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 19

Ultimos 30 días: 122

Todo El Tiempo: 6,745