Introducción

A damaged frame on an Astro A20 can be replaced easily with a 60 mm extension, Phillips #1 screwdriver, and a new frame.

Partes

No se requieren partes.

  1. Place your hand on the back of the speaker.
    • Place your hand on the back of the speaker.

  2. Remove the four 7mm screws with a Phillips #1 screwdriver.
    • Remove the four 7mm screws with a Phillips #1 screwdriver.

    • You may want to use a 60mm screwdriver extension to reach the screws inside of the headset.

    • Lift the speaker.

    • Disconnect the white connector from the device.

    • Remove the wires connecting the frame shown by the yellow square.

    • Pull the black cord through the hole shown by the blue arrow.

    • Find the top 7mm J1 JIS head screws.

    • Remove the two 7mm J1 JIS head screws with a J1 screwdriver bit connected to a 60mm extension.

    • Pull the black cord through the frame.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 32

Todo El Tiempo: 55