Repara tus cosas Comunidad Tienda

Arnova 7K G3 Rear Cover Replacement

Introducción

Before replacing any components on the Arnova 7K G3 tablet, disassembly is required. That process starts with removing the rear cover to gain access to a majority of the components including the battery, speaker, and logic board.

Qué necesitas

  1. Arnova 7K G3 Rear Cover Replacement, Rear Cover: paso 1, imagen 1 de 3 Arnova 7K G3 Rear Cover Replacement, Rear Cover: paso 1, imagen 2 de 3 Arnova 7K G3 Rear Cover Replacement, Rear Cover: paso 1, imagen 3 de 3

    • Remove four 5 mm Phillips #00 screws from each corner of the tablet.

    Editar

  3. Arnova 7K G3 Rear Cover Replacement: paso 2, imagen 1 de 2 Arnova 7K G3 Rear Cover Replacement: paso 2, imagen 2 de 2

    • Place the iFixit opening tool in the notches between the cases and pull the covers apart.

    Editar

  4. Arnova 7K G3 Rear Cover Replacement: paso 3, imagen 1 de 1

    • Repeat step two until 3/4 of the rear cover is unlatched.

    • Proceed to remove the rear cover by gently pulling it apart by hand.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 6 otros colaboradores

Tyler Sigafoose

Miembro Desde 03/19/15

210 Reputación

2 Guías creadas

Insignias: 5

+ 2 más insignias

Equipo

Michigan Tech, Team 1-2, Lauer Spring 2015 Miembro de Michigan Tech, Team 1-2, Lauer Spring 2015

MTU-LAUER-S15S1G2

2 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 8

Ultimos 30 días: 8

Todo El Tiempo: 370