Saltar al contenido principal

ArmorAll AA255 Lower Motor Housing Replacement

Qué necesitas

  1. ArmorAll AA255 Lower Motor Housing Replacement, Lower Motor Housing: paso 1, imagen 1 de 1
    • Remove the orange main housing unit from the vacuum bucket by pulling outward on the handle tabs while lifting upward as shown.

  2. ArmorAll AA255 Lower Motor Housing Replacement: paso 2, imagen 1 de 1
    • Remove the five 15mm PH2 screws.

  3. ArmorAll AA255 Lower Motor Housing Replacement: paso 3, imagen 1 de 1
    • Remove the 15 mm T20 screw. This screw is located nearest the power cord.

  4. ArmorAll AA255 Lower Motor Housing Replacement: paso 4, imagen 1 de 2 ArmorAll AA255 Lower Motor Housing Replacement: paso 4, imagen 2 de 2
    • Gently separate the upper and lower sections of the main housing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Brad Patterson

Miembro Desde 02/09/16

356 Reputación

1 Guía escrita

Equipo

IUPUI, Team 2-1, Baechle Spring 2016 Miembro de IUPUI, Team 2-1, Baechle Spring 2016

IUPUI-BAECHLE-S16S2G1

4 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 835