Saltar al contenido principal

Armitron Base Metal Bezel Stainless Steel Back Battery Replacement

Qué necesitas

  1. Armitron Base Metal Bezel Stainless Steel Back Battery Replacement, Prep: paso 1, imagen 1 de 1
    • Get the watch ready by placing it on its face.

  2. Armitron Base Metal Bezel Stainless Steel Back Battery Replacement: paso 2, imagen 1 de 1
    • Pick a location that is by the band so that if you make any scratches they will be less obvious when you are done. Place the screwdriver between the frame and the back cover. Gently tap the back of the screwdriver with a small hammer or whatever you have around. Do not use your hand!

  3. Armitron Base Metal Bezel Stainless Steel Back Battery Replacement, Open: paso 3, imagen 1 de 1
    • Remove back.

  4. Armitron Base Metal Bezel Stainless Steel Back Battery Replacement, Pry: paso 4, imagen 1 de 1
    • While securing the inside of the watch with a finger or thumb, gently pry out the battery.

  5. Armitron Base Metal Bezel Stainless Steel Back Battery Replacement, Replace: paso 5, imagen 1 de 1
    • Insert a new battery. Line up the cover in the correct position. Keep the notch lined up with the winding screw. Secure the back to the frame by applying equal pressure and squeezing the two parts together.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Matthew Radice

Miembro Desde 01/18/16

182 Reputación

1 Guía escrita

Un comentario

Ser magkanu po ang base metal vezel stailess steel v353-6AOO RO magkanu po model naganyan

reynaldo factor - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 12

Ultimos 7 días: 48

Ultimos 30 días: 194

Todo El Tiempo: 11,605