Saltar al contenido principal

Archos Jukebox Recorder 20 Motherboard Replacement

Qué necesitas

  1. Archos Jukebox Recorder 20 Motherboard Replacement, Battery: paso 1, imagen 1 de 1
    • Remove the plastic cover over the batteries on both sides of the device.

  2. Archos Jukebox Recorder 20 Motherboard Replacement: paso 2, imagen 1 de 1
    • Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).

  3. Archos Jukebox Recorder 20 Motherboard Replacement, Button Panel: paso 3, imagen 1 de 1
    • Using the Philips Screwdriver, remove the top 2 screws.

    • The screws are very small (2.5mm), put them somewhere you won't lose them.

  4. Archos Jukebox Recorder 20 Motherboard Replacement: paso 4, imagen 1 de 1
    • Using the Philips screwdriver, remove the bottom 2 screws (2.5mm).

  5. Archos Jukebox Recorder 20 Motherboard Replacement: paso 5, imagen 1 de 2 Archos Jukebox Recorder 20 Motherboard Replacement: paso 5, imagen 2 de 2
    • Remove the face.

  6. Archos Jukebox Recorder 20 Motherboard Replacement, Motherboard: paso 6, imagen 1 de 1
    • Remove four surrounding T5 screws as shown

  7. Archos Jukebox Recorder 20 Motherboard Replacement: paso 7, imagen 1 de 1
    • Remove all four purple bumpers. You may have to bend the metal surround out of the way.

  8. Archos Jukebox Recorder 20 Motherboard Replacement: paso 8, imagen 1 de 1
    • Remove metal surround from the Jukebox. You may have to straighten out tabs that were bent during disassembly.

  9. Archos Jukebox Recorder 20 Motherboard Replacement: paso 9, imagen 1 de 2 Archos Jukebox Recorder 20 Motherboard Replacement: paso 9, imagen 2 de 2
    Herramienta utilizada en este paso:
    Desoldering Pump
    $3.99
    Comprar
    • Desolder the motherboard from the frame at the eight locations shown. You may need to use a desoldering pump.

  10. Archos Jukebox Recorder 20 Motherboard Replacement: paso 10, imagen 1 de 2 Archos Jukebox Recorder 20 Motherboard Replacement: paso 10, imagen 2 de 2
    • Desolder the remaining two points on the backside of the Jukebox.

    • The Motherboard should now be free from the frame and ready for repair or replacement.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Shaun Rifield

Miembro Desde 03/21/18

121 Reputación

1 Guía escrita

Equipo

IUPUI, Team S2-G3, Freund Spring 2018 Miembro de IUPUI, Team S2-G3, Freund Spring 2018

IUPUI-FREUND-S18S2G3

3 Miembros

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 6

Todo El Tiempo: 392