Repara tus cosas Comunidad Tienda

Archos Jukebox Recorder 20 Hard Drive Replacement

Introducción

In this guide the user will learn how to disassemble an Archos Jukebox Recorder 20 in addition to learning how to replace the hard drive.

Qué necesitas

  1. Archos Jukebox Recorder 20 Hard Drive Replacement, Battery: paso 1, imagen 1 de 1

    • Remove the plastic cover over the batteries on both sides of the device.

    Editar

  2. Archos Jukebox Recorder 20 Hard Drive Replacement: paso 2, imagen 1 de 1

    • Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).

    Editar

  3. Archos Jukebox Recorder 20 Hard Drive Replacement, Hard Drive: paso 3, imagen 1 de 2 Archos Jukebox Recorder 20 Hard Drive Replacement, Hard Drive: paso 3, imagen 2 de 2

    • Use the T10 Torx Screwdriver to remove the 2 torx screws on each side of the device.

    • Two on each side for a total of four.

    Editar

  5. Archos Jukebox Recorder 20 Hard Drive Replacement: paso 4, imagen 1 de 2 Archos Jukebox Recorder 20 Hard Drive Replacement: paso 4, imagen 2 de 2

    • Remove the 2 screws on the top and the 2 screws on the bottom of the device using a Phillips #0 screwdriver.

    Editar

  6. Archos Jukebox Recorder 20 Hard Drive Replacement: paso 5, imagen 1 de 1

    • Remove the outer metal casing of the device by popping it off with a plastic opening tool.

    Editar

  7. Archos Jukebox Recorder 20 Hard Drive Replacement: paso 6, imagen 1 de 1

    • Remove the rubber bumpers on all four corners of the device.

    Editar

  8. Archos Jukebox Recorder 20 Hard Drive Replacement: paso 7, imagen 1 de 2 Archos Jukebox Recorder 20 Hard Drive Replacement: paso 7, imagen 2 de 2

    • Lift the hard drive out of its casing with the help of a plastic opening tool and slide it out. This will disconnect the pins connecting the drive to the rest of the device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Aidan Patterson

Miembro Desde 01/08/18

354 Reputación

2 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

IUPUI, Team S1-G4, Freund Spring 2018 Miembro de IUPUI, Team S1-G4, Freund Spring 2018

IUPUI-FREUND-S18S1G4

3 Miembros

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 19

Todo El Tiempo: 1,310