Saltar al contenido principal

Introducción

The first-generation 12" Retina MacBook has a design quirk that requires connection to low-voltage power after a repair. If this step is skipped, permanent logic board damage may result. This procedure is not required for 2016 and later models.

Connecting the Retina MacBook to low-voltage power requires a 5-Watt A/C adapter (like the kind that comes with iPhones) and a USB-A to USB-C cable, neither of which is included in the MacBook's original box.

Herramientas

No se especificaron herramientas.

  1. Using a USB-A to USB-C cable, connect your MacBook to a standard 5 W iPhone wall charger.
    • Using a USB-A to USB-C cable, connect your MacBook to a standard 5 W iPhone wall charger.

    Just posting a comment to reinforce the fact that applying the low voltage power is necessary. Don’t skip doing it or you may ruin your (probably expensive) replacement logic board!

    David Manley - Contestar

    I applied higher voltage for a short period of time, maybe 3 minutes. Is the damage instantaneous? Have i trashed my logic board?

    Emmett Verhoog -

  2. Plug the charger into a surge-protected A/C outlet.
    • Plug the charger into a surge-protected A/C outlet.

    • Wait until you hear the power connect chime (you should also see the battery charge symbol onscreen).

    • You'll typically hear the chime in 10 seconds or less—unless your battery charge level is very low, in which case it may take up to 15 minutes.

    • Power on your MacBook by pressing the power button.

    • Once the MacBook successfully powers on, you can disconnect the 5 W charger, and use/charge your MacBook normally.

    • If the MacBook fails to power on after 15 minutes, there may be an issue with your repair.

    This is quite scary. I wonder what the technical explanation for this behaviour is?

    Is it safe to just power it up using the built in battery? And then once it powers up, plug in the normal charger?

    Cool_Breeze - Contestar

    Is this necessary for the MacBook Pro (Retina, 15-inch, Mid 2015) 2,2 GHz Quad-Core Intel Core i7

    Where do I plug the usb c cable ? I can’t see any suitable port

    sissi - Contestar

    Is it necessary to use an iPhone charger, or can e.g. a 5W Samsung charger work?

    Ólafur Jón Thoroddsen - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

28 personas más completaron esta guía.

Jeff Suovanen

Miembro Desde 06/08/13

385,804 Reputación

260 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

142 Miembros

16,784 Guías creadas

11 comentarios

I recently did an upper disassembly on my MacBook 2015 and was doing the steps for a low voltage power up but when I plugged the power in the MacBook made the startup noise for a second then restart and did it again in these short cycles. I’m wondering if I improperly did the start-up process or perhaps something else is going on?

John Wiedemer - Contestar

Hi John, I have the same problem, have you found a solution ?

maxime.duret -

What sort of logic board damage might happen if this step is not followed? One of our customers brought us his 2015 MacBook after attempting to replace the battery himself. The new battery is not recognized, and the computer shuts off after about a minute even when plugged in. Could this be the result of him not applying the low voltage power?

clover - Contestar

Did a batter replacement and woops… used a 10W supply for 15 minutes.

Then noticed my mistake and changed to 5W supply, but computer does not start at all.

Could this be the “logic board damage” mentioned?

Niels Koldsø - Contestar

I just replaced a new battery on my MacBook ProRetina Pro early 2015 and bought this cable and adapter after following all the steps and instructions but when I plug the cable in, the display screen is still off (black) no chime sound of battery charging symbol on the screen. I plugged everything back in correctly and followed the steps exactly how they said and my mac won’t display anything. What could be wrong?

Ervin Valdez - Contestar

hello, after battery replacement, I followed the low voltage start up however I got repeated chime noises on boot with a blank screen. I have yet to attach the adapter that came with it. It is a early 2015 model. Any help would be great.

roohi vad - Contestar

A year has passed, did you get an answer..?

Mike A -

Is a 2.5 Watt charger sufficient to get the job done, or will the laptop not turn on at all?

Stefanie Sulzer - Contestar

Does this step apply to the MacBook Pro (Retina, 15-inch, Mid 2015) A1398 ?

I wanna replace the trackpad, but mac doesn’t have a USB c port, should I use some sort of adapter or just skip the step?

Please reply

sissi - Contestar

Chime, chime, chime and nothing else… 30 minutes and counting. I painstakingly followed the removal and replacement directions and now the computer will not fire up with the iPhone charger as directed. With my old, completely dead battery it would at least start up before if I kept the computer plugged in. It is a 2015 model.

Has anyone received any answers beside there may have been a problem with the install? “If the MacBook fails to power on after 15 minutes, there may be an issue with your repair.”

Is there another procedure to follow?

Mike A - Contestar

Seems no-one is getting any answers so I’ll just post my experience. I foolishly didn’t visit this site first so at first I had used the standard USB-C Charger and battery wasn’t recognised but mac booted with no chime but didn’t recognise battery. I put old battery back in and whilst it still said service battery it was at least seen. At this stage keyboard and trackpad wasn’t working but power button wasn’t. I then came about this article but only had a 10W charger available. The mac continued to boot off the original battery with no KB/Trackpad. I conceded and re-seated all cables again and fully closed lid and put screws back in. Then the keyboard and Trackpad worked. Just had no sound. So either the case has relevance or this time i re-seated the TP cable correctly. If that’s the case, I’m hoping the audio/headphones jack cable just needs re-seating which I will re-attempt when the next replacement battery arrives.

cameronpenna - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 57

Ultimos 30 días: 328

Todo El Tiempo: 15,870