Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Introducción

The hard drive is critical to the life of the device. The hard drive is a key piece of the time capsule, so awareness and moving slow through the steps is beneficial to ensuring no problems when the repair is made. This guide is do-able by anyone, but will not consume much time. If the user wants to add more storage then a replacement of the hard drive is a popular choice.

Partes

No se especificaron partes.

  1. Turn the device upside down to reveal the rubber section of the back plate. Using a metal spudger, carefully wedge the blunt tip into the space between the aluminum back plate and the rubber, separating the two pieces. This may take a few minutes to pry the rubber off completely. Once your are able to get a grip on the rubber it is easier to peel it off using your hands. Don't worry about re-applying adhesive to the rubber; the remaining adhesive has plenty of strength to affix itself to the aluminum.
    • Turn the device upside down to reveal the rubber section of the back plate. Using a metal spudger, carefully wedge the blunt tip into the space between the aluminum back plate and the rubber, separating the two pieces.

    • This may take a few minutes to pry the rubber off completely. Once your are able to get a grip on the rubber it is easier to peel it off using your hands.

    • Don't worry about re-applying adhesive to the rubber; the remaining adhesive has plenty of strength to affix itself to the aluminum.

  2. Remove the ten 3mm screws with a Phillips #00 screwdriver. The screws with adhesive covering do not need to be removed.
    • Remove the ten 3mm screws with a Phillips #00 screwdriver.

    • The screws with adhesive covering do not need to be removed.

  3. Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch

    Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch
  4. The fan affixed to the back plate is connected to the logic board. A small wire must be detached to fully remove the back plate. Pull the base of the wire close to the logic board and the connector will pop off.
    • The fan affixed to the back plate is connected to the logic board. A small wire must be detached to fully remove the back plate.

    • Pull the base of the wire close to the logic board and the connector will pop off.

  5. Peel off the adhesive backed foam from the top of the drive.
    • Peel off the adhesive backed foam from the top of the drive.

    • Lift the drive straight up and out of the device.

  6. Remove the SATA connector and power connector from the end of the hard drive by simply pulling the cables straight away from the connection points. Remove the SATA connector and power connector from the end of the hard drive by simply pulling the cables straight away from the connection points. Remove the SATA connector and power connector from the end of the hard drive by simply pulling the cables straight away from the connection points.
    • Remove the SATA connector and power connector from the end of the hard drive by simply pulling the cables straight away from the connection points.

Conclusión

To reassemble your device, follow these instructions in reverse order.

23 personas más completaron esta guía.

Patrick Butler

Miembro Desde 06/10/16

873 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 4-2, Livingston Fall 2016 Miembro de Cal Poly, Team 4-2, Livingston Fall 2016

CPSU-LIVINGSTON-F16S4G2

4 Miembros

15 Guías creadas

What’s the max hard drive a Time Machine can take?

ice2257 - Contestar

This answer: What's the biggest HDD that will fit on my Time Capsule? suggests that you can use pretty much any available drive. If it could take a 4TB in 2014 (one of the answers), I don’t think there would be any limit practically speaking.

odaiwai - Contestar

Great guide. One note. My unit was quite old and the rubber mat was brittle. Even with a heat gun and spudger I still tore it in several places. This might be avoided by heating up a cloth in a microwave first and applying it to the rubber before beginning to pull it off. Just a thought.

wfstapleton - Contestar

I’m not seeing a guide for the Apple Time Capsule 2TB MC344LLA / A1355 so I’ll have to see which one is closer to my model when it arrives,

But in the meantime has anyone been able to upgrade the hard drive past 2TB without any issues?

Is a Firmware update needed to do so?

David Bell - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 6

Ultimos 7 días: 43

Ultimos 30 días: 271

Todo El Tiempo: 10,494