Saltar al contenido principal

Qué necesitas

Resumen del Video

Este desmontaje no es una guía de reparación. Para reparar tu Apple TV 4K, utiliza nuestros manuales de servicio .

  1. Apple TV 4K desmontaje, Apple TV 4K desmontaje: paso 1, imagen 1 de 2 Apple TV 4K desmontaje, Apple TV 4K desmontaje: paso 1, imagen 2 de 2
    • Todos sabemos que este pequeño obelisco negro está empaquetando algunas 4K chuletas serias, pero veamos qué hay de nuevo en este renovado Apple TV:

    • Chip Apple A10X Fusion de 64 bits

    • Gigabit Ethernet, Wi-Fi 802.11ac, Bluetooth 5.0, receptor IR y HDMI 2.0a

    • ... y en el control remoto:

    • Superficie táctil de vidrio

    • Micrófonos duales

    • Acelerómetro y giroscopio

    • Bluetooth 4.0, transmisor IR, conector Lightning

  2. Apple TV 4K desmontaje: paso 2, imagen 1 de 3 Apple TV 4K desmontaje: paso 2, imagen 2 de 3 Apple TV 4K desmontaje: paso 2, imagen 3 de 3
    • Estamos ansiosos por profundizar en una nueva oferta de TV de nuestra compañía tecnológica favorita que vive en OVNI en Cupertino, pero primero, comparemos las manzanas con las manzanas 4K.

    • El Apple TV más nuevo no supera a su predecesor esta vez, pero sí notamos un par de diferencias clave en el diseño.

    • El panel inferior ha sido rediseñado para lo que parece ser una ventilación térmica seria.

    • Adiós, puerto USB-C.

    Bye bye usb C, hello hidden lightning port inside the Ethernet port!!

    stevesphone - Contestar

  3. Apple TV 4K desmontaje: paso 3, imagen 1 de 2 Apple TV 4K desmontaje: paso 3, imagen 2 de 2
    • Antes de abrir la caja, nuestros socios de Creative Electron proporcionaron algunos escáneres de rayos X de lujo.

    • La visión de rayos X revela un nuevo objeto circular que parece coordinarse estrechamente con los nuevos puertos de escape en el panel inferior.

    • ¿Es un fan? Un acelerador de partículas? Una parte del anillo de contacto?

    • Bien, nuestro interés es despertado. Es hora de abrir esta caja negra y ver de qué se trata esta actualización 4K.

  4. Apple TV 4K desmontaje: paso 4, imagen 1 de 2 Apple TV 4K desmontaje: paso 4, imagen 2 de 2
    • Tomamos una ruta de acceso familiar a través de la parte inferior del Apple TV 4K.

    • Al igual que con su hermano de K solo, el Apple TV 4K presenta clips de plástico fáciles de reparar que aseguran su panel inferior.

    • Estos clips son un poco más tercos que lo que hemos visto antes, pero aún así, no son terriblemente difíciles.

    • Sin foso de pegamento o tornillos poco comunes? Esta unidad mejorada obtiene un 1 Up como recompensa.

    • Pelar hacia atrás el panel trasero revela un ventilador fornido asegurado por algunos tornillos Torx.

  5. Apple TV 4K desmontaje: paso 5, imagen 1 de 3 Apple TV 4K desmontaje: paso 5, imagen 2 de 3 Apple TV 4K desmontaje: paso 5, imagen 3 de 3
    • ¡Después de sacar los tornillos T7 Torx, conocemos al mayor fanático de Apple TV!

    • Parece que Apple fusionó el nuevo ventilador con el conjunto de disipador de calor / escudo EMI del Apple TV 4th Generation, combinándolos para formar una solución de enfriamiento.

    • Este Voltron de un conjunto térmico sugiere que la capacidad 4K HDR viene con un aumento significativo en la producción térmica.

    • Con el giro de unos pocos tornillos Torx más, el conjunto se desmonta, revelando un ventilador reemplazable accionado por un motor sin escobillas Nidec.

    • Un ventilador reemplazable es una buena noticia para los propietarios. De lo contrario, estamos adivinando que un ventilador fallido significaría rápidamente un dispositivo fallido.

    • Este nuevo conjunto de ventiladores está aparentemente asegurado por un disco de identidad. TRON, ¿eres tú?

    Any clue on which way the air flows through the fan unit front to back, back to front or side to side

    Dan - Contestar

    From the housing of the fan, it looks like air is pulled in from the front and side vents, then exhausted through the back vents.

    Andy Tran -

    do all modern gadgets have blue loctite tipped screws? i’ve noticed this when i did my apple 4k disassembly, and likewise in replacement screws for my mbair 11inch

    carterschonwald - Contestar

    Anyone have any idea where one could find this replacement fan? Mine died and when watching anything 4K or higher (Dolby Vision) it begins to hiccup and lock up after 5 minutes. Took it apart and the fan has seized.

    devin.pearson - Contestar

  6. Apple TV 4K desmontaje: paso 6, imagen 1 de 2 Apple TV 4K desmontaje: paso 6, imagen 2 de 2
    • Nos complace ver que Apple mantiene la tradición de las placas lógicas fácilmente extraíbles para el Apple TV 4K.

    • Apple 343S00198 Procesador A10X Fusion de 64 bits

    • Controlador Broadcom BCM57762 Gigabit Ethernet

    • SK Hynix H9HCNNNBRUMLQR 2 GB LPDDR4 RAM y SK Hynix H9HCNNN8KUMLQR 1 GB LPDDR4 RAM para un total de 3 GB

    • Apple 343S00150 (número de pieza similar al controlador de memoria personalizado 338S00055 que se encuentra en la Retina MacBook 2015)

    • Módulo Wi-Fi / Bluetooth Murata 339S00381

    • Toshiba THGBX6G8D2LLDXG 32 GB de memoria flash

    • Toshiba THGBX6G8D2LLDXG 32 GB de memoria flash

    Broadcom BCM57762 should be PCIe Ethernet controller.

    JJ Wu - Contestar

    Yep, 10/100/1000BASE-T Ethernet PCIe Controller with ASF2.0.

    “The device combines a triple-speed IEEE 802.3-compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver, x1 PCIe bus interface and on-chip buffer memory in a single device. The device is fabricated in 1.2V CMOS process, providing a low-power system solution.”

    repoman27 - Contestar

    From the components around Apple 343S00150, Apple 343S00150 could be the PMIC. Memory controller should be integrated in the Apple A10X processor. There is 343S00151-A0 next to Apple 343S00150. Supposedly, Apple 343S00150-A0 and Apple 343S00151-A0 could be the PMIC for Apple TV 4K.

    JJ Wu - Contestar

    Does anyone know why Apple would use DisplayPort internally and convert it to HDMI instead of just using HDMI internally? (an ELI5 type answer would be best - https://www.reddit.com/r/explainlikeimfi... for more info)

    Matthew Adams - Contestar

    What is the exact part number or reference of that motherboard ?

    Can they be purchased on ebay, Apple or anywhere else ?

    Thank You

    Karine-Johanne - Contestar

    I’m wondering if you can simply buy the low capacity flash memory AppleTV model (with the 32GB Toshiba THGBX6G8D2LLDXG), then inexpensively replace the chip with a 256GB Toshiba THGAF8T1T83BAIR chip (or similar)?

    Steve Arkwright - Contestar

    FYI - The Ethernet Port has a hidden Lightning port inside! If you look inwards you can see the socket hole.

    The back row of contacts on the logic board are the Lighting port connections.

    Dan - Contestar

    This may sound a bit crazy, but I’m trying to see if I can power up the ATV4K’s logic board with a 12v Power Bank. I plan on connecting the leads to the Power Posts on the board which according to your specs draws 12v @ 1.083A. Do you see this as doable?

    Mario Choy - Contestar

    This is old but for anyone reading, you can definitely power all current Apple TV motherboards with various power supplies. As long as you confirm you are using a properly rated one it will work though if it is out of its housing you lose the heat sinks/fan. (Running Apple TV just fine from bench supply)

    sinkproductions -

    Can i disable bluetooth from my apple tv?

    Seems possible in some way to remove the Murata 339S00381 Wi-Fi/Bluetooth Module and i dont mind the module getting destroyed :)

    I get headache from bluetooth and the aluminium IR controller from the old apple tv works perfectly :)

    Aurin R - Contestar

    Would be really interessting for me too. The box could still be used over IR with a ONE for ALL remore IR control.

    My father is also very sensitive to bluetooth.

    I was not able to find productsheets for the Murata Chip, because it's a custom one. Will the box still startup without the chip?

    I would be happy for help!

    @solsang

    Joshua Capeder -

  7. Apple TV 4K desmontaje: paso 7, imagen 1 de 2 Apple TV 4K desmontaje: paso 7, imagen 2 de 2
    • No encontramos sorpresas aquí; el disipador de calor sigue siendo muy similar a su predecesor de 2015.

    • Nos tomamos un momento para arrancar un par familiar de supuestos postes de energía del cuerpo del disipador de calor.

    • Durante nuestro desmontaje de cuarta generación de Apple TV, sospechamos que la energía se transmitía a la placa lógica a través de los postes de tornillo del disipador de calor. Parece que este sigue siendo el caso con Apple TV 4K.

    • Con el disipador de calor y las publicaciones fuera del camino, lo único que queda por hacer es quitar la placa de suministro de energía.

    on my apple 4k, theres 4 copper pins on the plate, near the memory controller area (to power the fan?), and theres a slight elevated surface to kiss the CPU and mem controller,

    carterschonwald - Contestar

  8. Apple TV 4K desmontaje: paso 8, imagen 1 de 2 Apple TV 4K desmontaje: paso 8, imagen 2 de 2
    • La nueva fuente de alimentación tiene una potencia nominal de 12 V a 1.083 A. Este es un aumento modesto de la fuente de alimentación 0.917 A en Apple TV 4th Generation.

    • Tomando nuevamente el liderazgo de diseño de su hermano mayor, el Apple TV 4K evita el cableado interno entre la fuente de alimentación y la placa lógica.

    • El uso de postes conductivos en lugar de cableado probablemente ahorre espacio interno, y elimina la posibilidad de cables doblados o doblados durante el ensamblaje.

  9. Apple TV 4K desmontaje: paso 9, imagen 1 de 2 Apple TV 4K desmontaje: paso 9, imagen 2 de 2
    • ¡Están todos los bits! Ahora para reensamblar esto y ver cómo las cosas más extrañas son reales ...

    • ¡Y un agradecimiento especial a Creative Electron por enviarnos unos dulces rayos X todo el camino desde el otro hemisferio!

  10. Consideraciones Finales
    • Los clips de plástico mantienen la carcasa junta para facilitar la apertura.
    • Los componentes modulares facilitan el desmontaje y la reparación.
    • La fuente de alimentación es modular y cuenta con un conector AC-in extraíble.
    • Los tornillos Torx estándar mantienen todo unido.
    • Todos los componentes principales están soldados a la placa lógica, lo que significa que la reparación de cualquier problema de puerto requerirá una soldadura a nivel de la placa o un reemplazo completo de la placa.
    Calificación de Reparabilidad
    8
    Reparabilidad 8 de 10
    (10 es lo más fácil de reparar)

Un agradecimiento especial a estos traductores:

en es

78%

¡ Miguel nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Adam O'Camb

Miembro Desde 04/11/15

196,194 Reputación

416 Guías creadas

38 comentarios

Just sanity checking what my eyes are telling me - are both the inner and outer rings of that moving fan parts, or is the outer ring just an air channel?

Edit: ok the last breakdown picture shows the outside is not part of the fan

tipoo - Contestar

Got off the phone with Apple. No USB means a corrupted firmware means you will have to send in the device for recovery/restore. You will at least have to pay shipping. Apple stores should be able to recover/restore as well. Don’t exactly the USB pads on the PCB. Maybe the four pads on the left of the bottom image. Anyone?

Kemal NottaTurk - Contestar

Maybe they'll allow it to be done through the ethernet port….

Andrew spoelstra -

I just had this happen with the 12.4.1 update. Blinky LED & no video out at all. The bad news is the Genius Bar / Store Techs have no more access to do a factory restore than the user does. IOW: none. Nothing on Ethernet either. (That was straight from the GB guy’s mouth.) If there are USB pads on the board they don’t know about them.

And if this happens out of warranty it’s a $150 board swap. I advise turning off the auto-install for OS updates.

Michael Cashwell -

My Apple TV died, and they Apple store could not do anything to recover it. And Apple does not repair them, so the offered to sell me a new one at full price. And no shop will service them since Apple considers these disposable and does not provide schematics or parts to repair partners, so no one will touch it. They could at least sell logic boards, but you know, Apple I guess is not profitable enough as it is.

Tim Burke -

Any more detailed info (part numbers) on the remote?

techno_freak - Contestar

Isn’t that Broadcom ethernet chip used in thunderbolt dongles, but not necessarily anything to do with Thunderbolt? I.e TB carries it, but it's it’s own thing. Not sure this shows Thunderbolt on ARM.

tipoo - Contestar

It was so funny, to see it’s and it’s, the first meaning it is, the second meaning its. I haven’t seen that blunder in a long while. Thanks for the laugh.

Roberto Manuel -

That’s a lot of mirth derived from an extra apostrophe. Small things, as they say…

tipoo -

What quick video tear down for a product that took two years to make!

I would go slower and show the chips and defiantly try not to damage the backcover…

Benjamin Nabulsi - Contestar

Hm, I wonder if going down to 3GB impacts the A10X 128 bit memory bus from the 4GB iPads.

tipoo - Contestar

AppleTV 4K is awesome, seeing it naked it quite sexy indeed. Nice big cool fan.

Riccardo - Contestar

Is a bit of an illusion and I had to double check - only the inner blades are a fan, looks about as big as a regular laptops fan. The outer ring is metal air baffles/channels, connected to the upper heatsink, just to bring air in part of the fan and let it push air out the rear part.

tipoo -

When the Apple TV has better cooling than the MacBooks.

Christian Galvez - Contestar

What about the possibility to upgrade the 32/64 Gb memory?

Fedele Boccasini - Contestar

I wondered the same thing — if you can simply buy the low capacity flash memory AppleTV model (with the 32GB Toshiba THGBX6G8D2LLDXG), then inexpensively replace the chip with a 256GB Toshiba THGAF8T1T83BAIR chip (or similar)?

Steve Arkwright -

Is the memory bus still 128 bit, with 1GB removed from the iPad A10X?

tipoo - Contestar

Where is the IR receiver? I can’t see it in the photos.

ggilley - Contestar

It uses bluetooth. Only IR is used for the TV.

David Maitland -

This is what I came here for too.

There is an IR receiver, but it seems to have moved a bit left (facing the Apple TV 4K) from where the previous 4th gen was. I installed a few yesterday and stuck an emitter back on the center and got a bit nervous thinking they changed codes.

Aaron C -

Yes, the IR (Infrared) receiver is at the front left side. It is the four dots at the bottom left of the X-Ray photos in STEP 3.

Daniel Mui - Contestar

Is the built-in power supply capable of 110-220vdc? I’m thinking about buying one in the US and taking it with me to Asia where the power is 220v

Derrick - Contestar

i wish hacked this 4k tv for install IOS 11.1 on it every body have idea???

because in ipad pro same as!!

please how can edit ios image for install ios on 4k tv this is Revolution in age of smart t.v with one wireless touch pad any thing can do

behnam for - Contestar

Will it be hacked so that OS X can be installed? Benchmarking tests show the apple tv 4k is more powerful than a lot of macbooks out there…

Oman Sklavier - Contestar

Its an ARM chip, Its not suitable for X86 based software unless it gets some serious redesigns and workarounds.

UpicX -

Where is the IR receiver on the Apple TV 4k?

Michael Teruel - Contestar

Is the Wi-Fi wave 2 (ie. MU-MIMO)?

Anthony - Contestar

Hi, what is the logic board part number ?

Can it be purchased from ebay or apple ?

Thanks

Karine-Johanne - Contestar

would like to see you take apart the remote as the trackpad on mine doesn’t click anymore and I can’t figure out why, even after taking it apart.

pjbourque - Contestar

343S00150 seems power management chip.

YKU - Contestar

I am wondering if we could enhance the Bluetooth antenna to increase its reach when used as a HomeHub

Fernando Scheps Serra - Contestar

There is a hidden lightning port inside the Ethernet port, check out http://9to5mac.com/2019/10/17/Apple-tv-4...

stevesphone - Contestar

Yeah! I’m wondering the same.

James Almeida -

How did the Lightning port get missed? Didn’t the 7-9 leads on the board behind the 8 for ethernet catch anyone’s attention?

Ryan Coleman - Contestar

Do you have the parts numbers ? I search a original Apple TV 4k case

François Rais - Contestar

I’d argue with this repair ability score. While you can take it apart, you can’t get replacement parts, and therefore you can’t repair these, which sucks.

Tim Burke - Contestar

I think it would be worth mentioning that the Apple TV 4K that has no ports, can be reset by switching off and on the AppleTV several time in a row. I waited 20s in on and 10s while being off.

Source: https://www.reddit.com/r/apple/comments/...

Cycling Georges - Contestar

That absolutely does not work for everyone. Me included.

_Who_Am_I_ -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 12

Ultimos 7 días: 102

Ultimos 30 días: 510

Todo El Tiempo: 125,811