Saltar al contenido principal

Apple TV 4K Remote Logic Board Replacement

Qué necesitas

  1. Apple TV 4K Remote Logic Board Replacement, Remote Logic Board: paso 1, imagen 1 de 1
    • Heat iOpener according to manufacturer's instructions.

    • Place over the face of the remote to soften the adhesive under the glass.

  2. Apple TV 4K Remote Logic Board Replacement: paso 2, imagen 1 de 2 Apple TV 4K Remote Logic Board Replacement: paso 2, imagen 2 de 2
    • Using a spudger, gently lift the face of the remote. Starting from the bottom and working your way to the top.

  3. Apple TV 4K Remote Logic Board Replacement: paso 3, imagen 1 de 1
    • Push front face forward to disengage plastic clips at the top of the remote.

  4. Apple TV 4K Remote Logic Board Replacement: paso 4, imagen 1 de 2 Apple TV 4K Remote Logic Board Replacement: paso 4, imagen 2 de 2
    • Unlatch the connector that binds the touch screen and logic board.

    • Afterwards, use tweezers to detach the connector that binds the touch screen to the logic board.

  5. Apple TV 4K Remote Logic Board Replacement: paso 5, imagen 1 de 1
    • Lift the face from the body of the remote.

  6. Apple TV 4K Remote Logic Board Replacement: paso 6, imagen 1 de 2 Apple TV 4K Remote Logic Board Replacement: paso 6, imagen 2 de 2
    • Lift the latch holding back the connector to the battery.

    • Use tweezers to disconnect the battery connector.

  7. Apple TV 4K Remote Logic Board Replacement: paso 7, imagen 1 de 1
    • Remove the following screws using a T3 Torx screwdriver:

    • Eight 2mm screws

  8. Apple TV 4K Remote Logic Board Replacement: paso 8, imagen 1 de 1
    • Using a plastic spudger, gently remove the logic board from the case of the remote.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Keenan Barber

Miembro Desde 10/04/18

1,159 Reputación

3 Guías creadas

Equipo

UW Stout, Team S6-G3, Ogden Fall 2018 Miembro de UW Stout, Team S6-G3, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G3

4 Miembros

15 Guías creadas

Un comentario

Have you ever successfully reconnected the ribbon cable after disassembly? It seems nearly impossible to do by hand…

B R - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 15

Ultimos 30 días: 103

Todo El Tiempo: 4,224