Saltar al contenido principal

Introducción

This guide will show you how to access the battery and charging port in your Apple TV 4K remote for replacement.

  1. Heat iOpener according to manufacturer's instructions.
    • Heat iOpener according to manufacturer's instructions.

    • Place over the face of the remote to soften the adhesive under the glass.

  2. Using a spudger, gently lift the face of the remote. Starting from the bottom and working your way to the top. Using a spudger, gently lift the face of the remote. Starting from the bottom and working your way to the top.
    • Using a spudger, gently lift the face of the remote. Starting from the bottom and working your way to the top.

  3. Push front face forward to disengage plastic clips at the top of the remote.
    • Push front face forward to disengage plastic clips at the top of the remote.

  4. Unlatch the connector that binds the touch screen and logic board.
    • Unlatch the connector that binds the touch screen and logic board.

  5. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  6. Use tweezers to pull off the connector that binds the touch screen to the logic board.
    • Use tweezers to pull off the connector that binds the touch screen to the logic board.

  7. Lift the face from the body of the remote.
    • Lift the face from the body of the remote.

  8. Lift the latch holding back the connector to the battery. Use tweezers to disconnect the battery connector.
    • Lift the latch holding back the connector to the battery.

    • Use tweezers to disconnect the battery connector.

  9. Remove the following screws using  a T3 Torx screwdriver:
    • Remove the following screws using a T3 Torx screwdriver:

    • Eight 2mm screws

  10. Using a plastic spudger, gently remove the logic board from the case of the remote.
    • Using a plastic spudger, gently remove the logic board from the case of the remote.

  11. Gently dislodge the battery from the remote case, making sure to avoid damaging the battery itself. The battery should be fully removed now.
    • Gently dislodge the battery from the remote case, making sure to avoid damaging the battery itself.

    • The battery should be fully removed now.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Keenan Barber

Miembro Desde 04/10/18

571 Reputación

3 Guías creadas

Equipo

UW Stout, Team S6-G3, Ogden Fall 2018 Miembro de UW Stout, Team S6-G3, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G3

4 Miembros

6 Guías creadas

Great but can you explain how and what to use to seal it back.

With out sealing it not working properly

Thanks

Iva Sh - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 32

Últimos 30 Días: 147

Todo El Tiempo: 779