Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

  1. As the device base is firmly clipped, insert two metal spudgers to gently release the first clips.
    • As the device base is firmly clipped, insert two metal spudgers to gently release the first clips.

  2. Continue releasing the last plastic clips with your hands taking care not to break any of the plastic elements attached to the base.
    • Continue releasing the last plastic clips with your hands taking care not to break any of the plastic elements attached to the base.

  3. Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch

    Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch
  4. Use a philips screwdriver to remove the metal heat sink.
    • Use a philips screwdriver to remove the metal heat sink.

  5. The logic board is held in place by the power supply connector, but that's no problem for our spudger. A quick flick and the logic board is free. The logic board is held in place by the power supply connector, but that's no problem for our spudger. A quick flick and the logic board is free.
    • The logic board is held in place by the power supply connector, but that's no problem for our spudger. A quick flick and the logic board is free.

  6. Before you remove completely the power supply, unscrew the T5 screws on each side of the socket. You may now be able to remove the power supply with a spudger.
    • Before you remove completely the power supply, unscrew the T5 screws on each side of the socket.

    • You may now be able to remove the power supply with a spudger.

    • The rating of the power supply is 3.4V at 1.75A, which is identical to the 2nd Gen Apple TV's 5.95 watts.

  7. The last remaining part in the Apple TV is the status LED. You can remove this part with your plastic spudger. The last remaining part in the Apple TV is the status LED. You can remove this part with your plastic spudger.
    • The last remaining part in the Apple TV is the status LED. You can remove this part with your plastic spudger.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Vincent Monteil

Miembro Desde 06/07/13

6,384 Reputación

19 Guías creadas

Step 2: “caring not to break….”. Thanks, great guide. David

David Apimerika - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 16

Todo El Tiempo: 2,419