Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
As the device base is firmly clipped, insert two metal spudgers to gently release the first clips.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Continue releasing the last plastic clips with your hands taking care not to break any of the plastic elements attached to the base.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a philips screwdriver to remove the 5 screws securing the metal heat sink. On Rev A (A1469) you need a T7 srewdriver
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the power supply connector from the logic board with a spudger.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Before you remove completely the power supply, unscrew the T5 screws on each side of the socket.
-
You may now be able to remove the power supply with a spudger.
-
The rating of the power supply is 3.4V at 1.75A, which is identical to the 2nd Gen Apple TV's 5.95 watts.
-
Cancelar: No complete esta guía.
14 personas más completaron esta guía.
11 comentarios
Successfully sourced a new power supply for our 3rd generation after the last one was destroyed ironically by Apple juice. Sourced from China and replaced- presto!! It's working- all for $14.95
Where? I need on badly! Can you send me / Post here a link?
Hi, i have a 3rd gen Apple TV and I have problems with it, it doesn't turn on I don't now if it's the power supply or it is &&^&@@ up how can I figure out if it is the power supply and in that case where can I found one
