Apple Powerbook 520 General Disassembly

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Introducción

In order to obtain access to the internal components you must first follow this step by step general disassembly guide. This will be a first stop in installing a new component that is enclosed by the outer shell.

Qué necesitas

Paso 1 Apple Powerbook 520 General Disassembly

Apple Powerbook 520 General Disassembly, Apple Powerbook 520 General Disassembly: paso 1, imagen 1 de 2

Apple Powerbook 520 General Disassembly, Apple Powerbook 520 General Disassembly: paso 1, imagen 2 de 2

Turn computer over.
Remove battery expansion cover and battery.

Traducir

Paso 2

With monitor hinge at the bottom, remove the two top center screws.

Traducir

Paso 3

Remove top left and top right screws.

Traducir

Paso 4

Remove middle left and middle right screws.

Traducir

Paso 5

Open computer kickstands.
Remove screws underneath each kickstand.

Traducir

Paso 6

Lift keyboard from bottom and take out of shell.

Traducir

Paso 7

Apple Powerbook 520 General Disassembly: paso 7, imagen 3 de 3

Lift the white ribbon clamps securing the keyboard ribbon cables to the motherboard. You can do this using a plastic opening tool.
Removing both ribbon cables from the motherboard will leave the clamps like so.
From here you can access the logic board, hard drive, and floppy drive.