Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Apple AirPort Extreme Model A1034 Antenna Replacement

Qué necesitas

  1. Apple AirPort Extreme Model A1034 Antenna Replacement, Outer Case: paso 1, imagen 1 de 1
    • Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

  2. Apple AirPort Extreme Model A1034 Antenna Replacement: paso 2, imagen 1 de 1
    • Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

  3. Apple AirPort Extreme Model A1034 Antenna Replacement: paso 3, imagen 1 de 2 Apple AirPort Extreme Model A1034 Antenna Replacement: paso 3, imagen 2 de 2
    • Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

  4. Apple AirPort Extreme Model A1034 Antenna Replacement: paso 4, imagen 1 de 1
    • Unplug the black connector on the top of the metal casing by gently pulling horizontally.

  5. Apple AirPort Extreme Model A1034 Antenna Replacement, Antenna: paso 5, imagen 1 de 1
    • Remove the two 4mm phillips screws to remove antenna.

  6. Apple AirPort Extreme Model A1034 Antenna Replacement: paso 6, imagen 1 de 1
    • The circuit board connected to the antenna is attached to the metal case with foam adhesive.

    • Gently peel or cut the foam holding the circuit board with a knife and remove it from the AirPort.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Michael Garcia

Miembro Desde 10/12/11

411 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 17-15, Regan Fall 2011 Miembro de Cal Poly, Team 17-15, Regan Fall 2011

CPSU-REGAN-F11S17G15

3 Miembros

13 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 4,666